About jmprats

jmprats · 09-29-2021

Hi,The C9105AXW access point has got 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3).How do you configure those downlink interfaces in Mobility Express? Can you assign each interface to a different VLAN?Any link to Cisco inf...

jmprats · 09-23-2021

I want to use PEAP with ME with Local Authentication. It works but it shows to the users the internal certificate issued by Cisco Manufacturing CA. I have got in the controller a public certificate that I am using with the captive portal. How can I u...

jmprats · 06-28-2021

Most switches express Forwarding rate in Mpps (Mega packets per second). I can see Cisco Nexus 93180YC-FX states it has 1.2 bpps (billion packets per second, I think).How do you convert from Mpps to bpps? 1.2 bpps = 1200 Mpps?Thanks

jmprats · 06-18-2021

Hello,As far as I know, stacking has a shared control plane (master has the control plane) and vPC has separate control planes. But what happens when you have a intervlan routing in your stack or vPC? Are all layer 3 packets routed by the master in a...

jmprats · 12-01-2020

I have a rectangular auditorium with 2 APs diagonally and 1 AP outside as a backup. The 2 APs inside are identical C9120AXE. But sometimes I have a very uneven client distribution. For example, 50 clients on the AP1 5GHz band and 1 on AP2. Now:- AP1 ...

jmprats · 10-01-2021

Thank you very much, very helpful information. But still not working.With a Windows client, it doesn't show me a server certificate to accept and it doesn't connectWith an android client, it only connects if I choose not validate server certificate.I...

jmprats · 09-30-2021

I finally installed the eap public certificate (third party certificate) with "transfer download datatype eapdevcert " command and rebooted the controller.After the reboot, the command "show certificate eap" shows the new installed certificate but wh...

jmprats · 09-30-2021

And with EWC?I understand this AP is similar to AIR-AP1810W, which has got downlink LAN ports too (or Cisco OfficeExtend access point (OEAP) )Thanks

jmprats · 09-23-2021

Thank you. I will try later in a maintenance window. I don't want to take any risk of side effects changing the controller certificate.

jmprats · 06-28-2021

thank you, but I am not asking to convert Mpps (forwarding rate) to bps (Switch Capacity). I am asking to convert Mpps to Bpps.As you can see on the Nexus 93108 datasheet Cisco express Forwarding rate in mpps i bppshttps://www.cisco.com/c/en/us/produ...

Member Since	‎07-10-2003 03:58 AM
Date Last Visited	‎02-23-2022 12:07 AM
Posts	312
Total Helpful Votes Received	10

User Statistics

User Activity

C9105AXW downlink interfaces configuration

Mobility Express Local EAP Certificate

Forwarding rate Mpps to Bpps

VPC vs stacking Layer 3 fowarding

Uneven AP client distribution in auditorium

Re: Mobility Express Local EAP Certificate

Re: Mobility Express Local EAP Certificate

Re: C9105AXW downlink interfaces configuration

Re: Mobility Express Local EAP Certificate

Re: Forwarding rate Mpps to Bpps