As long as you meet the VM requirement and IP has reachability you can install and configure.   FI intern connects to Nexus 5K or your esxi has vSwitch or dVS for switching.   ... View more

Glad all working as expecting if resolve mark as solution, please. ... View more

Can you elaborate your question more detailed to understand better?   other note 7206 End of Life  ... View more

When the switch is using the factory default IP address, the System LED  flashes continuously   Try using below configuration guide to setup.   https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf ... View more

1-does "access snmplist" is an access-list that points to the server which is using the snmp like solarwinds? BB - check the ACL in you switch has snmplist <<- ues solarwinds IP address here 2- what does "snmp-server source-interface informs Vlan20" do? BB - souce of the interface where it uses to send trap to SOALRWINDS 3-what does "snmp-server contact NET TSD-Network Department" do as well? BB - This is where the switch department belong for information base 4-can i copy paste this configuration on all switches on the site and it will do the same effect? BB - as long as same ACL available and VLAN 20 available it should work ... View more

Personally i would not recommend having static IP address,   Rather I will invest more redundant  DHCP Servers or Co-locate which you can maintain the DHCP Servers.   ... View more

aaa authentication login default group radius local  <<- this is the correct syntax  (if you have radius group)   Another example if you using Group Servers :   https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_rad/configuration/15-mt/sec-usr-rad-15-mt-book/sec-rad-aaa-server-groups.html   ... View more

POST: MA BIST : Begin***ERR: S88G MDIO Read - Address is not decoded.   You having some issue here as mentioned above.   is this working Router and failed or a new one?   1. Power down the switch (pull the cable). 2. Apply power to the switch and force the switch to boot into ROMmon. 3. Use IOS version 15.2(4)E6. - For testing(make sure it stable and working) Download the BIN file (from the Cisco website) and copy to USB flash. 4. Force the switch to boot this IOS using the command "boot usbflash0:IOS_filename.bin".   Test all working.   Then format the Flash:   and copy from USB flash to flash - check the boot variable and wr and test and advise.   ... View more

Looks for me all good as of now..maybe worth connect console cable and capture the logs.   ... View more

For me this like normal any deploys how you do insite premises, sending server to connect to the internet to get updates.   same one more to  AWS Cloud, so you need to make network arrangement to be behind NGFW Fw for internet access.     For me AWS give you RFC1918 address space already, so they do provide some FW or Public IP information for you. depends on the arrangement, so you can use control of what traffic to send out.     ... View more

You can use EEM Script to report to any of your Server which can process this information and use Service-Now API for you to raise a ticket.   here is EEM Script best practice :   https://community.cisco.com/t5/networking-documents/cisco-eem-best-practices/ta-p/3127596   once you made test script any issue post here we can assist better. ... View more

This will be processed for the phone first come online and try to DHCP IP address and register with CUCM (if you set up correctly)   are this messages you see after you getting the DHCP IP and also register with CUCM ? or Phone never registering?   here is the reference guide for DHCP 53 and other options in case required to refer :   https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/network_registrar/8-3/dhcp/guide/CPNR_8_3_DHCP_Guide/bk_CPNR_DHCP_User_Guide_appendix_0111.html   ... View more

At this stage hard to stay what is causing this auto reboot, since it says device come up with Power-on   here are steps to identify the issue.   1. check any Power Lead loose connection. 2. connect console and capture the logs when this situation happens again to identify what causing the issue. 3. you can try upgrading to a newer version and see if that fix the issue.     ... View more

here is a good example for reference with config :   https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/72844-MST.html ... View more