DHCPv6-PD is not necessarily dynamic the same way as DHCP was with the public IPv4 addresses in the ...

Hi allIs there a trick to keep IPv6 ACLs for ZBFW working when the IPv6 prefix will change ? Backgro...

Hi!If you want to run the tunnel in its own zone, you'll need to cover multiple zone pairings:in_zon...

In the meantime, I assumed that the pattern would have to be roughly the same as for the 1600i/2600i...

Hi allAfter replacing a AIR-AP1231G and a WAP200 (which both had external antennae) with cluster of ...

Hi everyonePlatfom: CISCO881-SEC-K9, 15.2(4)M3I've been doing DDNS with DynDNS and the HTTP method f...

Hello PraveenThat sure DOES help a lot, thank you!Are all these options/fields needed for IPsec/IKEv...

Thanks harrjd222!As I had added to my post later on: ASDM had been launched with only an AnyConnect2...

This is a very good document, thanks for that. However, we're having no success forcing the connecti...

Hi BDid you ever get 2) solved with the ASA's? I just ran into the same issue: RRI routes are in the...

Ole,Thanks a lot for your reply. As of 15.1(4)M1, my 881 shows no means of setting preferred or vali...

Hi allOne of our local ISPs (Swisscom) is in a beta program for a 6RD deployment. I'm using their 6R...