Hi,for our CUCM provisioning I'm trying to find a way to restart a SCCP/MGCP Gateway via AXL. (Not the Gateway itself but it's association to CUCM).This becomes necessary as we are using autoconfig on the gateways and we need to tell the Gateway to l...
Hi,we're evaluating our provisioning tool with CUCM 10.5 (upgrading from Version 9.1) and we are facing an issue with our CAPF Settings. The methods we used to provision in CUCM 9.1 seem not to work anymore."While Certificate Operation is either Inst...
Hi,is there some corresponding command to "mgcp voice-quality stats" for SCCP-controlled FXS ports?I am missing CMR from these endpoints in CAR and CUSM. Though I don't think DSP may generate a MOS value, it should send Jitter, Lost Packets etc towar...
Hi,we're trying to integrate our SBC instances (CUBE SP on ASR1000) into our network management system (EMC SMARTS)Syslog messages from SBC instances are some kind of cumbersome with lot of line breaks resulting in multiple syslog messages the NMS mu...
Hi,I'm experiencing a little unhandsome issue monitoring our voice gateways via cuom (version 8.6)Whenever a device is discovered or re-discovered a bunch of alerts are generated:Se0/0/0:1 OperationallyDownSe0/0/0:2 OperationallyDown...All and every ...
Hi,unfortunately there is no restartGateway in AXL Schema and probably there will never be one.There is an easier way for my approach (SCCP controlled VGs). You can do a restart on the SCCP virtual Device (AN<last-ten-Digits-of-MAC>FFF: <?xml versio...
Thank you both,ok, seems there's another command to reset Gateways.I'll try this.One issue I still see:There are different types of reset ("reset","restart","appy Configuration".)While "restart" will do the right thing, the other two will drop all ca...
Thank you so much.Though I do not understand this change of behavior I'll ask our developers to add the affected lines in their provisioning. Unfortunately authenticationMode and keySize differ due to different phone types (Therefore Phone Security P...
"While Certificate Operation is either Install/Upgrade, Delete or Troubleshoot, it is mandatory to provide values for Authentication Mode and Key Size for addPhone request"This is the exact error I'm receiving.Until CUCM 10.5 this worked for me:<cert...
