About tunderhi

tunderhi · 02-03-2014

HiI know this has been discussed before regarding the CUCM in particular earlier this year:https://supportforums.cisco.com/message/4001153#4001153 We have a set up using VCS (7.2), Conductor (2.2) and MCU (4.4) where we need SIP content on encrypte...

tunderhi · 01-16-2014

CUCM - 9.1(1)I can report on the total amount of calls per month per number in CAR using:CAR > System Reports > Traffic > Summary by phone number I'm also trying to report on the total number of minutes a phone is in calls over a monthly period too. ...

tunderhi · 10-29-2013

Is it possible to suppress individual icons that display on the TX9X00 plasma displays? My customer is on a secure MPLS but doesn't have media / signalling encryption enabled on the endpoint so the unlocked padlock appears when calls to / from the T...

tunderhi · 05-23-2013

HiI'm currently testing a setup where we have a TX9000 calling directly to a VCS registered EX (also C20s). The quality of the direct call between the TX9000 and the EX / C20 is visibly poorer and in 4:3 format compared to when the call is bridged v...

tunderhi · 05-03-2013

Hi AllCUCM - 9.1(1)TMS - 13.2.1When I try to add my CUCM to TMS I get ' Warning! Connection status is 'No HTTPS response'. I can HTTPS to the CUCM admin pages from the web browser on the TMS server. I have followed the TMS admin guide, setting up th...

tunderhi · 11-01-2013

Hi BrandonThanks for your reply. I already had the customer's domain set in the Enterprise Params top domain and cluster domain name. The fix was setting the endpoints to use the 'Standard SIP Profile For TelePresence Conferencing' which has the ch...

tunderhi · 10-31-2013

Hi BrandonI have the same problem with CUCM 9.1 and TC 6.2. What was the resolution for the TAC case you raised?CheersTrevyn

tunderhi · 05-16-2013

Agreed. I would like to be able to call any domain name suffix so listing all of them isn't scalable.

tunderhi · 05-16-2013

Hi KlausI was told that *.* was a valid SIP route pattern https://supportforums.cisco.com/message/3898336#3898336 I have a setup like yours which I'm just starting to test but I can't see the call hitting the VCS-C.CheersTrevyn

tunderhi · 05-07-2013

The fix to this was to enable HTTPS on the TMS using a self-signed certificate. The cert can also come from the CA. HTTPS is disabled by default on 13.X. "If your TMS has been installed on Windows 2008, the simplest is to use the TMSEnableHttpsToo...

Member Since	‎06-04-2003 01:44 AM
Date Last Visited	‎10-15-2019 10:52 AM
Posts	36
Total Helpful Votes Received	1

User Statistics

User Activity

BFCP from MCU for encrypted calls

CAR - minutes per month reporting

Suppressing TX9X00 graphic display icon

TX to EX is poorer quality than via TPS

No HTTPS response when adding CUCM to TMS

Re: EX90 Registered to Regional CUCM :: Not able to dial out of

Re: EX90 Registered to Regional CUCM :: Not able to dial out of

Dialing external URI's from CUCM via VCS-C and VCS-E

Dialing external URI's from CUCM via VCS-C and VCS-E

No HTTPS response when adding CUCM to TMS