I have a customer who is interested in spanning three live traffic ports into one span port. I realize there is a possibility of dropping packets due to performance but I'm curious if this is even technically possible due to the limitation?Thanks fo...
Hi All,
I have a CME 8.6 box where outgoing caller id works perfectly for the skinny phones but the sip phones all announce as anonymous.
I've done some troubleshooting and debugs, but simply don't know where I'm making the wrong turn.
I've attached...
I have a CME 8.6 system with approximately 50 sip phones and about 10 skinny. Most of the phones are programmed to send the outbound caller id of the main phone number with a generic ... translation. (I can post configs if necessary). A few phones s...
Hi All,
We have a CUCM single server in a colo facility with a design similar to this:
Site 1 \
Site 2 - tunnels to colo - CUCM - 2921 CUBE - Sip Trunk
Site 3 /
Last week, in the above example, all was working and then site 3, lost voice capabi...
Hi All,
We have a working older CME/CUE system. On only one particular extension, when connected to the AA, if you dial the extension, it hangs up on you. - other extensions work properly.
I've attached a buffer trace from CUE that contains a trac...
Yup we are on PRI.
I've attached a current debug with ccsip messages, ccapi (all) and isdn q931.
I've dialed from extension 125, here is the earliest header of the call I placed.
From: "Anonymous" <sip:125@10.1.1.1>;tag=fec9b705b88f6108o0To: <sip:88...
Hi Nipun,
Not sure why but I was never notified of your response to me :/ I've opened the topic again - this kind of went weird on me in this thread.
John
