Hi, Do you now if CoA ACK message must use the same source IP address than the CoA request destination IP address ? In my case ISE send a CoA request to the IP address 192.168.1.100 and the switch answers (CoA ACK) with another source IP address.  ...

Hi all, Do you know if it is possible to use PIM SM and PIM SSM on the same router ? I would like to use ACL to do that but I don't know if SM and SSM are compatible with each other. Thanks Thibault

Hello, I have to configure AAA on HP 6125 (c7000 enclosure) with ISE for SSH and TELNET access.It works for TELNET but not for SSH. Attributes sent in access-accept for TELNET are the following:Huawei-Exec-Privilege = 3login-Service = 00 is for TELNE...

Hello,I would like to use mDNS AP to send mDNS packet to the WLC (source vlan are not visible to the WLC).I saw in the documentation that APs can either be in access or trunk mode to learn the mDNS packets from wired side and forward it to the contro...