I am running DNAC 2.3.5.5-70026 in a three-node cluster, non-SDA. My wireless network is based on 5520's and 2800 AP's. Are there any benefits for adding coverage areas and location regions to my wireless maps? We also have Cisco Spaces as a repl...
I am going to be upgrading the IOS on my 9300 switches due to a bug with IOS 17.6.5 and DNAC. I would like to enable Perpetual and Fast POE on my 9300's now. My question is will those features be enabled after the switch upgrade? The documentatio...
We are going to be replacing the switches at multiple offices this year, and wanted to see if there are any best practices for branch office designs. Today, we have a two-tier topology at every office with a pair of 3850's acting as the cores. We th...
When using ISE for TACACS, is there any benefit for creating an entry for each network device? Today, each of our sites are represented with three groups in ISE: LOC_RTR, LOC_SW, and LOC_AP. We manage our routers from their loopback interfaces, o...
I am at the point of bringing up DNAC. We have Prime which we use primarily for wireless configuration/monitoring. I am monitoring our network devices in Prime as well, but we rely on Orion for most of our monitoring. I was curious to know how m...
Thanks for sharing your insight on this. We are migrating to new WLC's this year and then will be working on replacing AP's over the next couple of years. I am hopeful that we will start receiving more CAD drawings of our branches to take adavantag...
Hi, Thanks for replying.We are placing AP's on our maps. We are also drawing in walls or using CAD drawings for obtaining this data. I was asking if there is any benefit to also create coverage and inclusion/exclusion areas in our maps. To me, it...
My resolution was I worked with TAC and they restarted the dna-event-runtime servicednacaap-app-services servicednacaap-runtime service services and the email worked again.
Hi, Did you get this resolved? I am dealing with the same issue but I am running 2.3.5.4-70852-HF3. I don't know if notifications stopped working when I upgraded to this version. I have a case open, but we have not made progress. For me, I get...
Thanks Leo. I had an understanding of what needed to be applied to the switch ports. The part I wasn't sure is if the switch reload after an upgrade would reset the PD. I'll follow what you described as treat the IOS upgrade and the enablement of ...
