About mburrell5

mburrell5 · 03-27-2015

I have a VG204XM running MGCP with CUCM 10.5. When the port is changed and reset on CUCM the config pushed down to the VG204XM has an error (this is identical to Bug CSCtr78616 reported on a 28xx router in 2011)In the logs, I can see that once the ro...

mburrell5 · 06-01-2014

Using ISE 1.2 and setting up a new Radius Server Sequence, I am unable to use IETF Radius attribute 88 (Framed-Pool) as it is not displayed in the Radius IETF Dictionary.Is there a reason for this? Most other IETF attributes are available, I am curio...

mburrell5 · 10-18-2012

I have a number of devices such as Cisco Call Manager, or Cisco Wireless Controllers, etc that I want to remain in DCR but would like to exclude from the Config Archive process. Is there any way of excluding an individual device from this process?Run...

mburrell5 · 10-16-2012

Running fault device discovery after adding approx 50 new devices to LMS DCR. It seems I have reached a limit in DFM with regards to how many device components it can manage. The devices are put into questioned mode and the following error is seen in...

mburrell5 · 05-15-2011

Using LMS 4.0.1.When looking at the Device Centre - Troubleshooting view for a device it will display the number of End Hosts in the Configuration Status>Configuration Details section. If I click on the number of devices a pop-up will appear saying "...

mburrell5 · 03-27-2015

Thanks Manish Gogna, IOS upgrade fixed it!

mburrell5 · 06-02-2014

Jatin,You will think I'm an idiot, but you have hit the nail on the head!!! We have two ISE implementations and I was mistakenly given the impression that both were the same version when in fact one is version 1.2 and the other is 1.1, which happens ...

mburrell5 · 06-02-2014

Thanks Jatin, I have just tried to replicate your screen shots on our ISE 1.2 installation and the Framed-Pool attribute is not there!! It seems to me that my Radius attributes are limited to RFC2865 whereas yours include the additional attributes in...

mburrell5 · 06-02-2014

Thanks, what I really want to use is IETF Attribute 88 Framed-Pool but it is not present in the IETF dictionary. My mention of ASA was really just to get the concept across.I have a Telstra Radius proxy that I need to authenticate remote users with u...

mburrell5 · 06-02-2014

Where (as in what part of the config) can the ip pool name (located on ASA) be assigned in ISE?

Member Since	‎11-14-2007 02:27 PM
Date Last Visited	‎05-06-2022 12:04 AM
Posts	115
Total Helpful Votes Received	5

User Statistics

User Activity

MGCP FXO Does Not Register With CUCM On VG204XM

ISE 1.2 IETF Attribute 88 Framed-Pool not available

LMS 4.2.2 Can you exclude a device from Config archive?

LMS 4.2.2 Fault Discovery - Network Adapters Limit Exceeded

LMS 4.0.1 End Host display issue

Thanks Manish Gogna, IOS

Jatin,You will think I'm an

Thanks Jatin, I have just

Thanks, what I really want to

Where (as in what part of the