Hi Brian,Yes, Switch1 FC1&2 can talk with Switch2 Fc1&2, you can realize that by two option:1. configure FCIP link as trunk mode and add vsan 600 into allowed-vsan list then make certain zone is merged correctly.2. You can leverage IVR method. conf...
Hi Brian,for question 1:Based on NX-OS 5.0(7) release note, Minimum NX-OS or SAN-OS Release :SAN-OS Release 3.3(1c) or later NX-OS Release 4.1(1b) or later Tested NX-OS and SAN-OS ReleasesSAN-OS Releases 3.3(1c), 3.3(5) NX-OS Releases 4.1(1b), 4.2(7a...
Hi David,when you configure ERSPAN, you need to configure an ERSPAN port-profile on N1K and apply the port-profile to already configured vmkernel interface used for ERSPAN, by which VEM will use the special interface for ERSPAN traffic. Please refere...
Hi Dave,If UCS FI is running NPV mode ( end host mode), the port on MDS should be F port or TF port ( F port with trunking capability). UCS FI port should be NP port or T-NP port ( NP port with trunking) correspondingly.So in your system, you can cha...
