About cinmachina

cinmachina · 01-30-2013

Hi all,I'm configuring my very first 2nd Generation 2901 Cisco ISR, and trying to set it up with CIMC-E. However, when I set up an IP address of 10.5.128.200 for the embedded-services-engine0/0 interface, it returns this error: % 10.5.128.0 overlaps ...

cinmachina · 01-23-2013

Here is the config.Problem is they cannot get to the internet. All internal networks are functional. HELP!Result of the command: "sho run": Saved:ASA Version 8.4(1) !hostname *******************domain-name *************************enable password ***...

cinmachina · 05-13-2011

There is a thread where a gentlemen running CUCM 8.0.3 here: https://supportforums.cisco.com/message/3182594He got it to work.Basically I'm getting an error message that says "Personalization is disabled on the selected device" whenever I try to push...

cinmachina · 04-26-2011

Is there one? Can't find this with google for some reason.Also, if I have 11 sites using traditional T1s with MPLS, and I add another site using EoC, will it run on the MPLS network the same?n00b questions, bear with me!

cinmachina · 03-31-2011

I've been trying to get this WS-C3560-24P-L switch I have to enable IP routing. So far I've been unsuccessful.I've tried the IP base IOS and the Universal IOS. I do not see any other type of IOS to download on there website.Am I missing something?

cinmachina · 02-06-2013

I'm confused. Why would I give it an IP address of a network it doesn't know about?

cinmachina · 02-05-2013

This router has sub-interfaces for the 128 - 135 networks.Are you saying I have to place it on a different network than ALL of those? I'm confused. Can you help elaborate?

cinmachina · 01-30-2013

That did the trick, thank you so much!

cinmachina · 02-09-2011

Yeah I forgot about subinterfaces. Also, I joined it to a VTP domain by doing this:config tvlan databasevtp domain XXXXXXexitAs you sort of mentioned above, with it's limited capabilities, I needed to actually be in vlan database mode to change the v...

cinmachina · 02-08-2011

Sadly, none of these answers are correct yet.Yes I can get into the vlan database and create a VLAN, HOWEVER, I cannot create a VLAN interface or change the VTP domain.I can see show vtp status....but the normal commands don't work.Is there anyone wh...

Member Since	‎06-09-2008 07:40 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	21

User Statistics

User Activity

Trying to set embedded-service-engine IP add, says it overlaps. HELP!

Can't get internet traffic to route through ASA. Internal works though.

Phone Designer using CUCM 8.5 - Personalization is disabled on the selected device, HELP!

Difference between Metro-E and EoC? More inside, help!

3560x won't do ip routing?

Trying to set embedded-service-engine IP add, says it overlaps.

Trying to set embedded-service-engine IP add, says it overlaps.

Can't get internet traffic to route through ASA. Internal works

Re: Cannot change vtp domain or create vlan - 2801 router

Re: Cannot change vtp domain or create vlan - 2801 router