Running vs 1.3.3.6 DNAC and using the syslog feature in DNAC (Design>Network Settings>Network>Syslog). Looks to be using port 514 by default. Is there a way to change
We have port security turned on:switchport port-securityswitchport port-security maximum 2switchport port-security violation restrictWe were getting an error on the port (with only 1 device connected to this port):Sep 16 15:49:42: %PORT_SECURITY-SP-2...
Ciscoworks LMS 2.6 - is not discovering 1 device on our network. It is able to discover a similar device on the same subnet with the same community strings. Why is it unable to discover this 1 particular device? Thanks.
We might be okay. The event just cleared when I ran the same command for the other card. Output:I-Card_Fault_CiscoEntityFRU-CARD-123.133.187.1/1000I-Card_Fault_CiscoEntityFRU-CARD-123.133.187.1/2000I-Card_Fault_CiscoEntityFRU-CARD-123.133.187.1/300...
