Hi,We are going build a Data Center considering the Cisco Nexus product. I have gone through with the related documents (VMDC and SAFE documents). We are planning to use N7K (VDC, VRF), ASA, LB etc.I have confusion/queries regarding traffic flows on ...
Hi All,We are using SNMP (MRTG & 3rd Party Software - CA eHealth) & NetFlow (3rd Party Software - CA NetQoS) to monitor our router interface utilization and traffic. However the Trend report of SNMP and NetFlow are showing difference in utilization. ...
Hi All,We are currently using 2 nexus 5548UP. However, not sure what would be the right way to configure LINE VTY and Console.We are planning in a simple way...such as eanbling SSH and use local admin user by using which the user will logged in. So f...
Hi,Recently there is some network issues (topology) happen due to some activity. However we couldn't do proper troubleshoot as we didn't find much logs in switch specially STP, Topology Chage, Root bridge, IGMP, Multicast etc. As per our case, we can...
Hi All,We have got a pair of N5K and 4 N2k. So far, we have configured VPC Keepalive (2x10G) & VPN Peer (1x1G) between N5K. Also we have configured one N2K with Dual Hommed VPC with both N5K.Now I am having some difficulties with desining/configuri...
Hi Jake,Thank you very much for your informative reply. Please find my answers according to your suggested points.1) Ok in our case.2) Ok in our case.3) Ok, I guess. The router we are monitoring is sitting on between Internet and Firewall. The NetQoS...
Hi,In our organizaiton we have Red Hat Cluster with 2 cisco switch (Model: cisco WS-C2960S-24TD-L, Version: "flash:/ c2960s-universalk9-mz.122-55.SE3/c2960s-universalk9-mz.122-55.SE3.bin"). - We are using HP Chassis c7000 and Server is on the chassis...
Hi Jerry, Thanks for your reply.1) Routing with HSRP: OK. It seems that our test bed scenario is working exactly as written in the document. 2) VPC-Peer Role Issue: OK. I will make my vPC "Primary" switch as the N5K-1 and also make HRSP active on tha...
