About arell1234

arell1234 · 11-03-2020

We have multiple (15) locations each running their own Cisco router. At Head Office we have a Cisco router that has multiple networks attached to it (Clients LAN, Server LAN, Phone LAN, MGMT LAN). We want to restrict the access to the Server LAN fro...

arell1234 · 08-20-2019

Hello,I am working on setting up some Policy based routing on my router. I need the subnet 172.16.208.0/24 to use 172.16.208.22 as the default gateway for traffic destined only to subnet 172.16.20.0/22. Traffic from 172.16.208.0/24 to anywhere else c...

arell1234 · 09-12-2016

I have recently downloaded the Cisco provided Stencil for the 2900 series routers. I was looking at using the 2911/K9 rear view for some documentation and I noticed that the GE0/1 and GE0/2 ports are not correct on the stencil: and here is an actua...

arell1234 · 03-28-2016

I am trying to disable TFTP on my router but have had no luck. I have no tftp-server commands in the running config but I still seem to be able to connect to the router with a TFTP client. Is there anyway to stop the router from accepting tftp connec...

arell1234 · 04-29-2015

This is what I have configured on my Router at head office (only relevant information). class-map match-any EXCHANGE match access-group 102class-map match-any SCCM match access-group name SCCMRules!!policy-map LimitTraffic class EXCHANGE shape peak ...

arell1234 · 08-23-2019

This worked, thanks

arell1234 · 08-20-2019

#show route-maproute-map 208to20, permit, sequence 15Match clauses:IP Policy lists:101Set clauses:ip next-hop 172.16.208.22Policy routing matches: 72 packets, 5712 bytes #show access-list 101Extended IP access list 10110 permit ip 172.16.208.0 0.0.0....

arell1234 · 04-29-2015

Thanks for the comment. I realized that I had the outbound policy set to the wrong interface. I added it to my WAN interface and it started working.Thanks

arell1234 · 09-18-2014

HO-Cisco#ping 172.16.108.21 rep 30 val dfType escape sequence to abort.Sending 30, 100-byte ICMP Echos to 172.16.108.21, timeout is 2 seconds:Packet sent with the DF bit setReply data will be validated!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Success rate is 100...

arell1234 · 09-18-2014

from head office to remote officeHO-Cisco#traceroute 172.16.108.21Type escape sequence to abort.Tracing the route to SAC-cisco (172.16.108.21)VRF info: (vrf in name/id, vrf out name/id) 1 van-sprint (172.17.1.5) 8 msec 0 msec 12 msec 2 10.255.253.1...

Member Since	‎10-18-2006 07:53 AM
Date Last Visited	‎11-13-2020 12:03 AM
Posts	21

User Statistics

User Activity

Placement of ACL

PBR question

Cisco 2911 Visio Stencil

Disabling TFTP

QoS does not seem to be wokring

Re: PBR question

Re: PBR question

Thanks for the comment. I

HO-Cisco#ping 172.16.108.21

from head office to remote