We have a SDA environment where we created a L2 Vlan with a Gateway (GW) outside Fabric. For the GW we created a L2 Handoff on the border, for the network we created a L2 Network with the option "Layer-2 only". Now we are facing some issues with ARP ...
Dear CommunityWe are trying to implement DHCP in ACI with DHCP Relay with Multiple-VRFs (Inter-VRF). As DHCP Server customer is using Infoblox and first tests where not successfull. For info, dhcp in same VRF where DHCP Server is also located works w...
We have purchased for one of our customers the Booster Performance License: FL-4320-BOOST-K9=.
Now I'm having issues with the installation of the license. I'm unable to install the license in the traditionell way. Anybody have any experience with ins...
Dear CommunityI'm fighting a little bit with the above HW and QoS. Good and easy documentation or examples I haven't found until now. So I hope that maybe somebody can give me some tips / examples how to implement.On NX-OS you have the following thre...
Hello TogetherI need a second opinion to a issue I'm facing actual at a customer. We have one access point AIR-CAP2602I-E-K9 which boots, gets ip, joins controller but short after that crashes with a Unexpected exception to CPU and reboots.Anybody el...
We have exactly the same issue. I was trying out to find out how the acl / where the acl's are assigned to -> Ingress Traffic, Egress Traffic, to or from Client.
Today I did a lot of testing and for me it seems that the ACL is applied in both directi...
