Hi, I've setup an ISR900 router in DC which come with two internet links. Each internet link come with it's own /29 subnet. Both the WAN interfaces are connected to these two internet link with primary outgoing point to G4 with a static default route...
Hi,We've configured our CUCM v9.1.1 to sync the AD account from 2 different OU. However, when we performed the authentication, we can only point to 1 OU. We've user which reside in Support OU and need to be authenticate.E.g.:LDAP Directories Configu...
Hi,Would like to find out is there a way to route the "Q" calls to the agent while the agent state is changed to "Not Ready" with reason code.My client would like to force the "Q" to those agent which changed to the agent state to "Not Ready" with pr...
Hi,We have various model of ip phone in our production network, and each model, with different phone load although same model. For e.g.:CISCO 7911, we have 8.3.2S, 9.0.3S existing in the production network.I used RTMT to filter the out-dated (prior t...
Hi expert,I've CIPC with free-form device name configured and registered to CUCM 8.6. Would like to know which device mac the CIPC use when it fallback to SRST? The VG configured with CME-SRST, and the provision method is auto none.Thanks
Do you mind the share what media do you have in the remote branch office? A single internet circuit? with static/dynamic IP? How many users/devices on the remote office? What is the MTIK router capabilities/feature?
Hi Georg,Yes, G2 is configured as trunk port as i wanted to have multiple "INSIDE" vlans to be provisioned in the future based on different services. Since these vlans will be "INSIDE", i dont see any issue to keep the "zone-member security inside" a...
Hello Georg, Yes, that is the port where the "INSIDE" VM's connected to. The default gateway for the VM subnet is Vl131, so the VM's reach the default gateway and ping to the public DNS via this port. TIA.
Hi Paul,Yes, i did removed the zone-pair "OUT-TO-IN". If you refer to my config attached above you may see that.As you said, I created this zone-pair for the troubleshooting purpose as I wasn't sure if the return DNS query traffic from ISP/Internet b...
