Hello. I'm having problems with TCAM carving on Nexus 9000v release 10.1(1). VXLAN configuration on the 9000v requires TCAM carving. Specifically, the command "hardware access-list tcam region arp-ether 256 double-wide" needs to be entered. To do thi...
Hi, I'm in the process of configuring FnF on an ASR1000 and have run into an issue. I'm wondering if anyone else has experienced an issue where the source IP address displayed doesn't match the IP address of the source interface. I've configured Loop...
All,I have the following EEM applet that will run successfully whenever an EIGRP route changes...event manager applet eigrp_change event routing network 0.0.0.0/0 type modify protocol EIGRP ge 1 action 1.0 set msg "$_routing_network/$_routing_mask vi...
I'm testing CSM 4.2 in my lab with the 90-day evaluation license.I've got a few routers setup with OSPF and everything seems to be working great. However, I can't find anywhere to manually set the OSPF Router ID. Is this even possible with CSM. Am...
All,My FWSM recorded the following event and I have no explanation as to how this is possible.%FWSM-6-305010: Teardown dynamic translation from apps:172.31.129.222 to web:172.31.129.222 duration 3:00:00If you read closely, the IP addresses are identi...
Hi Joseph,I appreciate your replies and expertise. I'll look around for examples of using TCL scripts within EEM and see what I can come up with.Thanks again,Bruno
Hi Joesph,Thanks for the reply.I was thnking an array in TCL would work too but I am not a programmer by any stretch of the imagination I'll do more reading and practicing to see if I can figure this out.This brings me to two more questions...1) If I...
More info...SNMP might be useful here as well.The OID for the EIGRP table is 1.3.6.1.4.1.9.9.449.1.3.1.1.14.After doing an SNMPWalk, the exact match for 172.30.1.48/29 is...1.3.6.1.4.1.9.9.449.1.3.1.1.14.65536.10.1.4.172.30.1.48.29, Type=OctetString,...
