Hi all,
I am trying to provision a 3702 model Universal AP from Cisco and have followed the instructions in the following Cisco guide:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html
However, whenever ...
Hi all,
We upgraded our ten ISE nodes from v1.2.1 to v1.4 patch 6 at the weekend. Since then we have been getting the above alarm message very frequently (often every five minutes) and it is really annoying.
Six of the ten nodes have the PSN persona ...
Hi all,We had 802.1x/MAB running fine at a site with Cisco 3750 switches. We then upgraded to Cisco 3850 switches. Now we find that a number of Avaya IP phones get stuck saying "Discover xxx.xxx.xxx.xxx" and when you do a "sh auth session int gi x/y"...
Hi everyone,I came across something very odd today. I have been for a few months now involved in a NAC rollout project and one of today's tasks was to turn on Monitor Mode at one of our sites. I have done this without any problems at a number of othe...
Hi everyone,I have an issue at an overseas branch office where we are advertising an open SSID. The problem is that users do not see the SSID which we advertise but see "[SSID name] 2" advertised instead. When they connect to this duplicate SSID they...
Hi Clark,
You need to provide a few more details. For example, have you ensured that RADIUS traffic (UDP 1812/1813 normally) is allowed between your branch site and the HQ where presumably the ISE RADIUS servers reside? What are you seeing at the br...
Thank you - yes, TAC confirmed that we had indeed hit that bug. Not sure I will apply Patch 7 to all our ISDE nodes - it is just too soon after our recent upgrade from v1.2.1. I have just disabled the annoying alarm message in the meantime.
Hi all,I have had a think about this overnight and the best answer I can come up with is that the final line in my code ‘spanning-tree portfast’ is the only one that could possibly have had any impact on a port status. I tried an experiment whereby ...
Sorry: forgot about the usual background information. We are running 1142 LAPs at this branch office and the open SSID is anchored to a 4400 series WLC in the DMZ. This SSID appears to be working fine everywhere else.
