About jaighobahi

jaighobahi · 10-03-2015

Hi Folks,I have issues understanding the EIGRP update process. Attached is a word document containing screen shots from a Wireshark capture. Please, have a look at them and offer your thought. Thanks.

jaighobahi · 06-12-2015

Here I have an excerpt from a Cisco documentation:The following example shows how to configure two Ethernet interfaces to obtain the next-hop router IP address from the DHCP server:ip route 10.10.10.0 255.255.255.0 dhcp 200ip route 10.10.20.1 255.255...

jaighobahi · 06-10-2015

Greetings All,Please, recommend how I can configure secondary IP address pool in a Cisco IOS DHCP server. The screen shot below shows the syntax error I am getting even though I am following Cisco's documentation. I thought the failed command above ...

jaighobahi · 05-17-2015

Hello People,I am studying EIGRP configurations and verifications and I come accross a sub topic on EIGRP Over MPLS. I take this to mean that I need to understand the rudiments of MPLS in order to be able to configure EIGRP over it. However, I do n...

jaighobahi · 03-22-2015

Hello All.I am reading the following book and trying to practice with the topics.Implementing Cisco IP Routing (ROUTE) Foundation Learning GuideFoundation learning for the ROUTE 642-902 ExamDiane TeareOn page 34 of the book, under the heading "The IP...

jaighobahi · 10-06-2015

Thanks a lot. The link is very helpful.

jaighobahi · 06-22-2015

I appreciate your patience!

jaighobahi · 06-22-2015

Thanks once again. My confusion lies in the fact that 209.165.200.255 255.255.255.255 specifies an IP address rather than a network address. Does it not matter?

jaighobahi · 06-22-2015

Thanks a lot Mr. Nawaz. I need one more confirmation. Is the IP address 209.165.200.255 the address of the exit interface or is it the address of an interface on a remote router?

jaighobahi · 06-22-2015

Apology for resurrecting this thread. I will very much appreciate it if the commandRouter(config)# ip route 209.165.200.225 255.255.255.255 dhcpcan be explained in a way that a newbie can understand. I thought a static route command needs to specif...

Member Since	‎06-18-2011 11:08 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	97

User Statistics

User Activity

EIGRP UPDATE

DHCP: Configuring a Static Route with the Next-Hop Dynamically Obtained

Unable to configure DHCP pool

MPLS (Pop tag, stacked label, LSP, FEC) ??

Relationship between Classless routing protocol, IP Classless command and Default route

Thanks a lot. The link is

I appreciate your patience!

Thanks once again. My

Thanks a lot Mr. Nawaz. I

Apology for resurrecting this