About pbosio

pbosio · 02-04-2015

Hi All, UCS-C260 currently running ESXi-5.0.0-469512-standard with the following license;Product: VMware vSphere 5 Foundation Licensed for 2 physical CPUs (unlimited cores per CPU)Expires: Never If the ESXi is upgraded from 5.0 to 5.5 do you need new...

pbosio · 09-21-2011

At Thu Sep 22 13:40:08 EST 2011 on node X.X.X.X, the following SyslogSeverityMatchFound events generated: SeverityMatch : AlertMatchedEvent : Sep 22 13:40:04 CUCMHOSTNAME syslog 1 nbslogpd[8228]: 33 messages were dropped AppID : Cisco Syslog AgentCl...

pbosio · 08-16-2009

Hi there,This is happening across 5 remote sites which just got cutover from basic Key systems to IPTel.PSTN into FXO, PLAR to IP Phone and no Caller ID, just comes up with unknown number. Caller ID working on outgoing calls but thats the carrier set...

pbosio · 08-01-2008

Hi,Have a bunch of analog wireless DECT phones that all connect back to an ASCOM box. The ASCOM connects to the LAN for connectivity back to the CUCM which is version 6.1.2.1000-1All of the DECT phones are configured as Basic 3rd party SIP devices on...

pbosio · 04-09-2008

Hi,Cannot get the nokia e61i to register to cucm6.0.1 using SIP - there is no intellisync installed.Can somebody list the configs required on both CUCM and the nokia.Thanks

pbosio · 02-05-2015

Thanks Terry

pbosio · 10-04-2012

Hi James - never really found out an answer. It would be nice to know if the TAC do have something to say about it.

pbosio · 08-16-2009

Guilherme,did you ever sort out your Caller-ID problem on the FXO ports?I have exact same problem, PSTN line works with Caller-ID when connected to analog phone but when connected to router with FXO port I just get Unknown Number

pbosio · 08-01-2008

Hi,If you pull out the disk from slot 1/ID 1 then it goes back into slot1.I used to pull the disk from slot1, put another disk back into slot1 and allowed it to mirror and then did any patches/upgrades.Only once I had to revert back and then it was a...

pbosio · 06-06-2008

Thanks for the reply Yorick.

Member Since	‎12-05-2004 09:31 PM
Date Last Visited	‎04-01-2022 12:03 AM
Posts	37
Total Helpful Votes Received	1

User Statistics

User Activity

VMware ESXi 5.0 to 5.5 upgrade license question on UCS-C260

SyslogSeverityMatchFound CUCM8.6

FXO - H.323-CUCM6 - PLAR - IP Phone- Caller-ID not working

Third Party SIP phones call forwward access codes to CUCM 6.1.2

Nokia e61i CUCM6 setup

Thanks Terry

SyslogSeverityMatchFound CUCM8.6

Re: Caller-id not working on IOS voice-gateway

Re: Recover from Upgrade Failure on Cisco CallManager

Re: Extension Mobility Bulk Phone Subscribing