About anthonylofreso

anthonylofreso · 03-25-2019

Hello all, I'm looking for guidance on proper cert validation for use with the ISE API.I have valid certificates on all ISE nodes signed by our internal CA, but whenever I'm making API calls, they will only work if I specify -k/--insecure with curl.U...

anthonylofreso · 10-23-2018

I have a hunch that people have run into this sort of thing before. (TAC case open, but curious if somebody here just knows the answer) APs at our Home Office are in Local ModeAPs at our Remote Offices are in Flex Mode When clients roam from a remo...

anthonylofreso · 08-31-2018

Building on the post from last week: ISE 2.2 : High memory utilization issue "What I've experienced is memory climbing at 1%/day until it gets up around 80%, and there it levels out. However... without fail, at some point, we see the memory start t...

anthonylofreso · 08-29-2018

TL:DR... Is there a simple way to share (solely) DACL information. Any add/del/chg regarding DACLs would be of interest. If you view the DACL_Report_Details screenshot attached, can I somehow pull a logfile from ISE that contains a running list of ...

anthonylofreso · 08-28-2018

I'm wondering what others configure under: Administration > System > Settings > Protocols > RADIUS > Suppression & Reports Screenshot of my settings attached. While I understand that this is probably highly specific to your environment, I'm curious...

anthonylofreso · 04-17-2019

"The API's to add/manage endpoints are exposed, a developer could build a custom system to do this." <-- this is what we're doing (with little dev xp).Checkout some of the well documented python framworks like Flask or Django, and you can quickly get...

anthonylofreso · 04-05-2019

Is there any way to change the default pagination value?

anthonylofreso · 04-05-2019

This, sounds painful... And it's unfortunate to hear as I plan to use the API to present things like dacls to other teams since the RBAC controls in ISE GUI are so poor.

anthonylofreso · 02-14-2019

Ahh, I see! Is there a way to get the level of endpoint detail the MNT API provides via ERS?: NAS IP addressIdentity GroupNetwork Device NameNetwork Port ITIP AddressACS ServerLocation

anthonylofreso · 02-14-2019

Here is the reference I've been using: https://community.cisco.com/t5/security-documents/ise-ers-api-examples/ta-p/3622623 I'm not sure how to get what your asking though. May run some tests in our environment. I've been using the API more lately, as...

Member Since	‎02-21-2014 10:46 AM
Date Last Visited	‎03-04-2022 06:27 AM
Posts	115
Total Helpful Votes Received	139

User Statistics

User Activity

ISE API and Valid Certificates

Issues with client roam from Remote Office flex-mode to Home Office local-mode

ISE 2.2 : High memory utilization issue (2)

Grant Read-Only access to ISE DACLs

Recommended RADIUS suppression settings

Re: RBAC for adding MAC address

Re: REST API for DACLs Not Accurate

Re: REST API for DACLs Not Accurate

Re: REST API Basics

Re: REST API Basics