About nesttech1

nesttech1 · 03-30-2024

Can the A99-12X100GE modules run in the ASR-9910 or ASR-9906 at line rate (not oversubscribed) with 5 x A99-SFC-S or 5 x A99-SFC-T ?We have options for A99-RSP-TR or A9K-RSP880-LT-TR. Can this work with these RSPs running IOS XR 7.9.2 ?We have tried...

nesttech1 · 11-04-2023

We have noticed that ASR-9901 running IOS XR 7.5.2 is not keeping the clock setting after reload.We set the correct time and date using the "clock set" command and it shows up as below:=============================RP/0/RSP0/CPU0:ios#sh platSat Nov 4...

nesttech1 · 08-30-2023

We have upgraded the ASR-9901 with IOS XR Version 7.3.2 and are seeing these messages during the booting processRP/0/RSP0/CPU0:Aug 30 21:32:37.010 UTC: tam_entropy[317]: %SECURITY-TAMSVCS-3-ENTROPY : Shutting down tam_entropy process for Software TAM...

nesttech1 · 12-29-2021

We have upgraded the A9K-RSP880-LT-SE processors with the IOS XR 7.3.2They seem to boot fine in our ASR-9006-AC-V2 chassis, and we do not see any errors.Also, all of the FPDs are upgraded to the required current IOS version.However, the red FAIL ligh...

nesttech1 · 07-21-2021

Can anyone provide instructions how to reset the "Username" and "Password" on the NCS-55A1-36H-SE-S ?We have one of these units here, but the login information is lost. Thank you!

nesttech1 · 03-30-2024

these slides are showing SFC3 type fabric card which have 600G capacity, but we are running SFC type fabric cards with only 230G capacity

nesttech1 · 11-05-2023

We are just trying to set the correct date and time for the regular XR Console for now.Every time the clock goes back to the previous setting (June 23)Maybe this router need a battery on the main board to be replaced?Thank you!

nesttech1 · 11-05-2023

We have tried the "update-calendar" command, but it says that it is not applicable for this platform. See below:RP/0/RSP0/CPU0:ios#clock set 18:49:30 november 5 2023Fri Jun 23 18:46:40.140 PDT18:49:30.008 PST Sun Nov 5 2023RP/0/RSP0/CPU0:ios#clock u...

nesttech1 · 09-04-2023

We have upgraded to the recommended IOS XR version 7.5.2 and these messages have gone away.So this issue was specific to the IOS XR version 7.3.2

nesttech1 · 08-30-2023

These messages only appear during the booting sequence. Once the router is up, these don't show up anymore.This router is not yet in production, so I don't know if there is any specific impact that these messages will cause.

Member Since	‎06-20-2014 12:18 PM
Date Last Visited	‎04-03-2024 12:05 AM
Posts	36
Total Helpful Votes Received	10

User Statistics

User Activity

A99-12X100GE with A99-SFC-S / A99-SFC-T without being oversubscribed

ASR-9901 not keeping the clock setting

ASR-9901 - tam_entropy process shutdown

A9K-RSP880-LT-SE front bezel FAIL light is on with IOX XR 7.3.2

Password Reset on NCS-55A1-36H-SE-S

Re: A99-12X100GE with A99-SFC-S / A99-SFC-T without being oversubscrib

Re: ASR-9901 not keeping the clock setting

Re: ASR-9901 not keeping the clock setting

Re: ASR-9901 - tam_entropy process shutdown

Re: ASR-9901 - tam_entropy process shutdown