Hi,I am attempting to apply the specified patches to UCS servers. Can I download them directly from the VMware site and apply them as I would with any other ESXi patches, or is there a specific custom build for Cisco?ESXi 5.0 / 5.1 / 5.5 / 6.0 VMSA-...
Hi,vmware -vlVMware ESXi 6.0.0 build-3073146VMware ESXi 6.0.0 Update 1console VMware ESXi 6.0.0 build-3073146-custom-Cisco-6.0.1hardware: UCSC-c220-m4sI am attempting to upgrade to version 6.5 or 7 because the VMware console displays 'VMware ESXi 6.0...
Hi,I want to enable support for TLS 1.2 and/or 1.3 and disable support for TLS 1.1. If not possible, at least disable TLS 1.0. The CUCM version is 11.5. Phone models include 7906, 7911, and 6901. All security profiles are set to non-secureThanks
Hi,10.0.0.0/11Site 1:- 10.0.0.0/12- Divided further into /16: 10.0.0.0/16, 10.0.1.0/16- The first /16 is dedicated for management.- Starting from the second /16 for data: 10.1.0.0/16- Switch 1 VLAN 10: 10.1.0.0/24- Switch 2 VLAN 10: 10.1.1.0/24- Swit...
ApplicationCUCM version 11.5.1.13902-2expressway X8.11.4HardwareUCSC-C220-M4S (BE6000M)Here is the bundleVMware-ESXi-6.7.0-17700523-Custom-Cisco-6.7.3.1-Bundle.zipAs per the screenshots below, CUCM 11.5 is compatible with version 6.7, and UCSC-C220-M...
Hi"But you should first check, if your phones support TLS 1.2 or higher"Since all phone security profile and trunk security profile are set to non-secure , does it matter ?Thanks
Hi,Sorry I did not get what you mean by the below crypto ikev2 policy 1encryption aes-256integrity sha sha256group 5prf sha sha256lifetime seconds 86400encryption aes-256 Thanks