About navinjk1974

navinjk1974 · 09-21-2017

Hello Our Current UCS firmware is at 2.2 (5b) and are planning an upgrade to 2.2 (8g), and are currently using the B200 M3 and M4 Model Servers and running Esxi 6.0.U2 with Version: Version 1.6.0.25 fnic & Version: Version 2.3.0.7, enic drivers. A...

navinjk1974 · 09-04-2017

We have a mix of B200 M3 and B200 M4 servers a total of 20+ Blades running currently on 2.2(5b) UCSM Version and with a recent Infosec update we need to fix some Vulnerabilities with Vmware and wanted to know if can just upgrade the Server Blades to ...

navinjk1974 · 02-07-2017

Hi We are setting our New Hitachi Storage, and wanted to know if we need to use Lun ID as 0 for boot lun ? or can we have any number as the Lun ID . Please review and respond. A lso can i just have only one WWN each for the Primary and Secondary Tar...

navinjk1974 · 01-25-2017

Please review If i can follow the below steps. 1- Create a New Boot Policy 2- Modify the Updating Service Profile template to use the New Boot Policy. 3- With Maintainence Policy Setup to UsrAck, When I Ack and reboot a single host the new boot pol...

navinjk1974 · 01-24-2017

Please review If i can follow the below steps.1- Create a New Boot Policy2- Modify the Updating Service Profile template to use the New Boot Policy.3- With Maintainence Policy Setup to UsrAck, When I Ack and reboot a single host the new boot policy w...

navinjk1974 · 09-27-2017

Additional Information I am revieng the Internal Dependencies for upgrade from 2.2 (5b) to 2.2 (8g) and the table shows Minimum Qualified Software Version & Recommended Software Version. What does this Say can u give an example and will it affect my ...

navinjk1974 · 09-21-2017

Understood, to clarifiy further. I need to upgrade the enic/fnic only after a server firmware is upgarde not otherwise, as i will have to plan it out on multiple days. After the Infrastructure is upgraded.

navinjk1974 · 09-12-2017

Thanks for the details, also is there something quick to share about known issues with the upgrades to the version, apart from reading the release notes for the ver.

navinjk1974 · 09-12-2017

Thanks for the responses, i would like to add some clarification so to achieve my work.We would like to plan our Vmware Esxi Env to VMware Vsphere 6.0 Update3 and understand that we need to be at 2.2 (8g). Current UCSM running at 2.2(5b) With B200 M3...

navinjk1974 · 01-25-2017

But if I have multiple hosts using the same template this change will cause all Esxi hosts to reboot correct ? How do I manage 1 host at a time. Regards navin

Member Since	‎07-23-2014 04:09 AM
Date Last Visited	‎09-27-2017 07:25 AM
Posts	23
Total Helpful Votes Received	1

User Statistics

User Activity

Cisco UCS firmware Upgrade Questions

Different UCSM and Blade Versions

SAN boot Lun ID

Modify Boot Policy -How to

Modify my boot Policy ?

Re: Cisco UCS firmware Upgrade Questions

Re: Cisco UCS firmware Upgrade Questions

Re: Different UCSM and Blade Versions

Re: Different UCSM and Blade Versions

But if I have multiple hosts