easiest method would static mapping of EPG's to ports.Assuming this a network centric migration

which version are you using ?You should be on higher than IOS XE 3.7.2 or IOS 16.2.1

Did you try setting the timezone and clock protocol sourcehttps://www.cisco.com/c/en/us/td/docs/swit...

For proper vPC operations, it is recommended to use a direct connection between the vPC peers withou...

Catalyst 9500 support stackwise virtual and work like a single switch So you wont require a First Ho...

A network topology diagram would be helpful. I dont have a lot of information of Oracle RAC but from...

As far as I know, Nexus 3000 series switches have honor based licenses i.e you can use them without ...

I think you are doing NXOS based VXLAN, then you require peer-link and keep-alive links as per tradi...

Whats the use of having MTU as 9000 on WAN when your internal network (firewall) is set to 1500

I would not do VRRP with this network. The reason being :Extending the layer-2 fault domain by creat...

For vPC VTEP and port-channel to the servers it will work fine but for non vPC VTEP (active-standby)...

Hi Andy,I did implement in one of the projects. The only difference was the switches connecting to t...

Could be a defect. You may have to work with Cisco TAC