I've setup a site to site vpn on an ASA 5510 using ASDM (as I have many times before) and the tunnel...

Thanks for the info Adam. I have tried all of those settings on the PSTN Trunk settings for each voi...

I have a UC540 (current software version) and I recently setup an auto attendant. Everything is work...

Okay, nothing has worked. I've asked Cisco AND CenturyLink and no one seems to be able to tell me if...

Sure, here's port 0/1/0 which is the port I have been doing most of my testing on. All ports are con...

Have you checked to make sure the voicemail box shows as GDM in CCA under telephony/voicemail/mailbo...

I had a similar issue to this on a new UC560 awhile back and I was using x299 for vm pilot. Finally,...

Does anyone have any additional experience on the fxo ports not disconnecting immediately when a cal...

Unfortunately I can't change the pins since I'm already on 2 pin rj11. What issues were you seeing t...

Thanks. I'll see if I can pressure the telco a little more. Does the voltage issue sound viable?Trav...

I have a client site that is experiencing some randomly weird issues with pots lines and fxo cards o...

Unfortunately, I never figured out the root cause. Cisco sent me another brand new UC560 and followi...

Just wanted to update this discussion.I finally got an RMA for the old unit completed and the new on...

Thanks, I appreciate your response. Unfortunately, this problem is a growing one. It started that we...

We have a new UC560 and upon initial configuration, it started rebooting almost everytime a call com...