About David_Mitchell

David_Mitchell · 04-01-2014

Hi All,I have been debating on selling my Cisco Lab in favour of running everything in GNS3. Until now I have retained it purly for the switching hardware and voice cards. I have built it up over the years and it has got me through several certifica...

David_Mitchell · 03-28-2014

Good afternoon all, I have labbed a L2TPv3 Ethernet Pseudowire topology to try and learn more about the differences between L2TPv3 vs L2 VPN o/MPLS etc and now that I have it labbed and working I can see how it would scale from a SP point of view i.e...

David_Mitchell · 03-27-2014

Hi all, I have been creating a GNS3 lab for MPLS VPN and I have the whole thing working end-to-end except that I can't get the PE to redistribute OSPF into BGPAs far as I can see I am doing this correctly but the only network that is redistributing a...

David_Mitchell · 03-27-2014

Hi all, I have been creating a GNS3 lab for MPLS VPN and I have the whole thing working end-to-end except that I can't get the PE to redistribute OSPF into BGPAs far as I can see I am doing this correctly but the only network that is redistributing a...

David_Mitchell · 02-08-2014

Hi all,Can't believe I am having to ask this but I can't seen to get my head around why this simple task is not working, please help!I have a simple physical home lab topology R1_SITEA <> ISP <> ISP <> R2_SITE_B I am trying to NAT all internal subnet...

David_Mitchell · 04-02-2014

New forum is hopeless. can't view any of my posted questions/discussions, can't view any of my old posts and i am getting notifications of post updates from posts i have never had involvement with which were posted years ago!I am very suprised to see...

David_Mitchell · 03-27-2014

Apologies Jon, since the forum format has changed I am seeing two streams for this same post.I have resolved the issue, if you can some how see what I cannot, you will find the solution (if your interested) if you can't and you are still interested i...

David_Mitchell · 03-27-2014

Aha... I see why I had to add the "external keyword now"I have done the following on the CE:CE1(config)#router ospf 1CE1(config-router)#no redistribute connected subnetsCE1(config-router)#network 192.168.1.0 0.0.7.255 area 0 I have don the following ...

David_Mitchell · 03-27-2014

Hi Dragan,It isn't the network statement as this is covered by the OSPF configuration on the fa1/0 interface itself.I have however resolved the issue......If interested I had to add the following to the PE routers:PE2(config)#router bgp 65000PE2(conf...

David_Mitchell · 02-08-2014

Thanks for the quick reply Alain,I powered the lab back on to try what you suggested and it started working without any config changes.No idea what caused it but its working now so was probably something to do with R1!I have the confirmation output b...

Member Since	‎11-01-2010 09:25 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	43
Total Helpful Votes Received	15

User Statistics

User Activity

Do I keep my Home Lab or Sell it on and use GNS3 (now that Switching is around the corner)?

L2TPv3 Ethernet Pseudowire Scalability

MPLS VPN Lab problem with redistribution of CE OSPF networks from the PE

MPLS VPN Lab problem with redistribution of CE OSPF networks from the PE

NAT Deny IP range not matching correctly in ACL

New forum is hopeless. can't

Apologies Jon, since the

Aha... I see why I had to add

Hi Dragan,It isn't the

NAT Deny IP range not matching correctly in ACL