About Vinny

Vinny · 04-05-2018

How would you design your network subnets in a zero-trust model approach ? If you use an "application centric" architecture, subnetting and address aren't so important since you group servers by applications instead of vlans/subnets. What would b...

Vinny · 12-08-2017

Hi, Does Nexus 9000 supports Fabricpath or not ? I see people claiming it does and other it doesn't and I can't find a clear answer. Thanks

Vinny · 12-05-2017

Hi, I'm working for a client that wants to implement VMware NSX has overlay but wants a new network for underlay too. I'm working on this underlay. They will add VXLAN with NSX after this. He wants a spine/leaf architecture. The easiest way would...

Vinny · 11-02-2017

Hi, I currently have a Cisco ISE 1.4 that is used for WIFI. Licencing is : 100 Base 100 Plus 100 Apex Wireless and VPN is enabled. Wired is disabled. Now I want to add to this ISE some device administration of switches (about 120 devices). I'...

Vinny · 11-15-2016

Hi, I have a client that have VOIP on several sites over a MPLS network. In their branch offices, they have cisco 2911/2951 with some QoS configuration. They talk to phone servers over the MPLS to a data center that have ASR 1000 routers at edge. P...

Vinny · 04-06-2018

Hi ! first I want to tell you that this project was cancelled so it was never made and I don't know if everything would have work but this was the plan : 1. How many uplink did you configure from one leaf to one spine? Two in our case but tha...

Vinny · 04-06-2018

that's what I call a complete answer. Thank you very much ! Now it's clear.

Vinny · 12-08-2017

In fact, this text confirm Fabricpatch isn't supported on Nexus 9000 ;) "With Cisco FabricPath, the switched domain no longer has to be segmented, providing data center-wide workload mobility. Because traffic is no longer forwarded using Spanning T...

Vinny · 12-05-2017

I found the video presentation of this powerpoint. Everything is very clear now. To summurize: connect spines and leaf though routed ports (no switchport)configure loopback address on every nodesuse ip unumbered on all interfaces and bind it to l...

Vinny · 12-05-2017

thanks for the links.I'll have to take a deeper look at the first one but the last two are more about overlay than underlay.They talk a lot about vxlan but since NSX is going to do the vxlan (overlay), I just want to be sure the underlay is OK.I foun...

Member Since	‎09-28-2010 06:21 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	68
Total Helpful Votes Received	10

User Statistics

User Activity

Let's say you start a new network with ACI (design question)

FabricPath on Nexus 9000

Building your own underlay - spine/leaf

ISE licencing

QoS and routers

Re: Building your own underlay - spine/leaf

Re: Let's say you start a new network with ACI (design question)

Re: FabricPath on Nexus 9000

Re: Building your own underlay - spine/leaf

Re: Building your own underlay - spine/leaf