Hi there,i have a question regarding the drop behavior in my QoS setup, especially because i want to implement a Scavenger queue for some big file transfers to protect some other critical applications.Here is the configuration for the outgoing direct...
Hi all,i have a question regarding bursting in ethernet networks.Is there a way to configure policing on an ISR (28xx) router, that i get some kind of PIR (EIR) behaviour for an Ethernet WAN connection?My consideration is, that i get a scenario wher...
Hi all,after updating the ASR1004 Router to ROMMON 15.2(1r)S and IOS-XE 03.06.02.S, i get the following error messages:%IOSXE-3-PLATFORM: F0: cpp_cp: QFP:0.0 Thread:101 TS:00000059590688361391 %IPSEC-3-HMAC_ERROR: IPSec SA receives HMAC error, DP Han...
Hi there!I have configured some iPads and iPhones to Connect to an ASA via AnyConnect (ASA 8.4(1), iOS 4.2.1, AnyConnect 2.4.4009).I have configured the devices with the "iPhone Configuration Utility" (iPCU 3.2.0.267).My question is: Does anybody kno...
Hey Blake,
maybe your running into an issue mentioned in the ASA release versio 9.4:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa94/release/notes/asarn94.html
(check the important notes in the beginning)
Elliptic curve cryptography for SSL...
Hi Steve, im sorry but we have not followed up the problem since we changed the implementation to another MDM solution. We do not use AnyConnect on iOS at the moment...
The bursty traffic was also my first thoughts, but why is it over a "longer" period of time (up to 20 seconds i think).I will try to reproduce the problem in a lab scenario. Maybe i should implement WRED to worse the scavenger queue...
The two error messages have nothing to do with each other i think.Router A:RouterA#sh crypto ipsec sa int Tunnelxxx | in spi current outbound spi: 0xF854D536(4166309174) spi: 0x3E92BEE4(1049804516) spi: 0xF854D536(4166309174)Router B:Ro...
Hi again,im sorry, i have pasted the wrong error message ;-).But for this message i have looked and the SPIs are ident for both ends (inbound to outpound, outbound to inbound).The other old error message which is still there is:004711: Aug 31 10:59:0...
