We have two ASR1006 routers, one at each remote site, connected into a provider's optical WAN networ...

In your L3VPN configuration example above, under the BGP part, you don't show any address-family vpn...

Does the 2821 router support jumbo frames on the integrated gig ethernet ports? I need to up the MTU...

If a site has two outbound WAN routers (for redundancy) that are configured as PE routers with the W...

Can I have two core nexus 7ks connected to a single catalyst 6509 (Sup720) using vPC?

I get the following error when I try to apply a QoS policy map to an interface on a 4510E, Sup 7E, I...

I understand that in 8.4 multicast is not support in multi-context mode. How about the up-and-coming...

I have the same question about creating a layer 3 port-channel using two 10gig interfaces in an ASR ...

I'm following the suggestions/examples in the Enterprise Medianet QoS Design guide 4.0 to build QoS ...

Here is the QoS policy applied to a 10gig interface on a Nexus 7K. Basically it sets up the followin...

That's a great reference and I've taken a look at it before, which helped me to configure the egress...

I have an access-layer 4510-E IOS XE 3.2.4.SG with Sup7-E. It is connected to the distribution layer...

The 6509 with SUP-32-GE-3B (8 GE ports) is running IOS 12.2(33)SXH7. I've applied this QoS config to...