About JESSICA Walsh

JESSICA Walsh · 12-19-2017

This script is from a Cisco doc and is supposed to check for any AV and FW in the hostscan table and...

JESSICA Walsh · 12-14-2017

Thank you! This has helped immensely and fixed the same-subnet ACL issue! Do you know of any best pr...

JESSICA Walsh · 12-13-2017

We wish to do stateful v6 addressing for tracking purposes, so we have a Windows v6 DHCP server set ...

JESSICA Walsh · 09-13-2017

I need the access-list list to police other traffic. I understand what you're saying, but traffic so...

JESSICA Walsh · 09-01-2017

Right, but this FE80 traffic is TO the local segment. That's what I find perplexing. You are saying ...

JESSICA Walsh · 08-31-2017

I'm making outbound Ipv6 ACLs for LAN traffic on L3 SVIs and am trying to determined what is actuall...

JESSICA Walsh · 08-03-2017

What does choosing "deflate" for ssl compression do and what is the recommended setting? ASA platfor...

JESSICA Walsh · 08-03-2017

What are all the recommended settings for DPD for anyconnect client?

JESSICA Walsh · 05-24-2017

Silly question, but what exactly does this command do? aaa authorization ssh-certificate I thought i...

JESSICA Walsh · 05-23-2017

Any advice on how to configure the class map for this?

JESSICA Walsh · 05-15-2017

We added our controller to Prime with no issues but Prime doesn't see any of the APs. I cannot figur...

JESSICA Walsh · 07-26-2016

Thank you!!!

JESSICA Walsh · 08-05-2015

We have a group of people who need for the ports to autoconfigure to the correct vlan when various e...

JESSICA Walsh · 04-10-2015

Well surprise-I did that and it started to pull down the client! However, I did test from an entirel...

JESSICA Walsh · 04-09-2015

No luck. I ran a wireshark dump and it goes through the exchange, my client sends a client key excha...

DAP LUA script to check any AV and FW in hostscan