About Steve Wood

Steve Wood · 08-17-2020

Installed a Smart collector for a customer. Now need to try and align the contracts. No matter what I try i cannot get past the registration once the Cotract and SN are entered and get the following message.This contract is not active and not associa...

Steve Wood · 03-06-2019

Hopefully someone can help me or advise. I presently have 2960S switches running in a mixture of edge switches generally running c2960s-universalk9-mz.150-2.SE4-6.bin and mixed 2960S/2960-X stacks running c2960s-universalk9-mz.152-2.E5.bin/c2960x-uni...

Steve Wood · 08-28-2014

When I run "sh interfaces transceiver" on a 4500 it fails to display any details. SFP modules fitted are GLC-LH-SMD=. When swapped into a 3750X "sh interfaces transceiver" works fine. Anyone resolved this issue ? sh moduleChassis Type : WS-C4510R+EP...

Steve Wood · 07-17-2014

Brand new out of the box and I am getting these error messages in syslog. Anyone seen these ? Found an explanation here but it doesn't mean much to me. It obviously is finding issue with the 4712's http://www.cisco.com/c/en/us/td/docs/switches/lan/ca...

Steve Wood · 02-21-2014

Guys this is my first attempt at setting up IPS and I am obviously missing a trick. No matter what IP address I apply to the sensor I cannot attach.I am expecting to be able to attach to the IPS via the FW inside interface. Thanks in advanceASA ...

Steve Wood · 08-17-2020

CSAM reports "You are not authorised to access this resource. I can share Contract details via private message.

Steve Wood · 01-31-2019

Was there a solution to this issue as I am experiencing the same symptoms on a 5516-X Cisco Adaptive Security Appliance Software Version 9.10(1) Firepower Extensible Operating System Version 2.4(1.103)Device Manager Version 7.10(1) Tried downgrading ...

Steve Wood · 10-29-2018

Nice tip that Reza

Steve Wood · 01-08-2017

Thank you Gurpreet for this nugget the issue just hit me on a 2960XR stack running 15.2(2)E5

Steve Wood · 08-29-2014

Thx Inayath for the info

Member Since	‎08-02-2012 09:18 AM
Date Last Visited	‎09-15-2020 09:09 AM
Posts	40

User Statistics

User Activity

Cannot access Smart Portal

2960S platform assert failure message. IOS version

Show interfaces Transceiver not displaying detail on a 4500

4510R+E syslog messages C4K_SUPERVISOR-3-LINKDFEWATCHDOGTIMEOUT: Module

Cannot connect to IPS - 7.1(8p1)E4.

Re: Cannot access Smart Portal

Re: ASA 5506 - Another ASDM stuck at 17% or Unable to load the firewall's config

Re: Why some switch ports does not show mac address

Thank you Gurpreet for this

Thx Inayath for the info