About ramtech.computing

ramtech.computing · 12-30-2012

Hi All,Happy new year to you all.I have a problem that has me perplexed. I have a production 1841 that was working fine but stopped behaving after a reload, and I can't get it going properly again. He is a Picture of what is meant to happen. http:/...

ramtech.computing · 07-31-2011

Hi,I have just got myself a nice shiny new 867w and i am having a lot of trouble getting the integrated AP working and I can't find a working sample config to work from.To get going I simply want one vlan(1) on the router with all the switch ports on...

ramtech.computing · 07-01-2011

Hi,I am configuring an 1812 for PPPoE and have struck a snag...I am guessing it is a problem with the IOS version but according to the capability matrix it should work.The IOS is advanced IP Services 12.4-6.T5Router(config)# vpdn enableRouter(config)...

ramtech.computing · 06-28-2011

Hi,I need to be able to do RDP down an IPSEC tunnel between 2 877 routers (Site to Site VPN) as well as allow RDP in from the internet interface.so I have a ip nat source static tcp 192.168.1.5 3389 interface dialer0 3389to permit the external traffi...

ramtech.computing · 06-21-2011

Hi,I sort of asked this question elsewhere on the forum but the thread went dead again. So I will ask it explicitly here as a more appropriate forum...I have a 857 doing NAT for the internal vlan1 interface (192.168.20.0/24) attached traffic.ip nat ...

ramtech.computing · 01-01-2013

Hi Hardik,Either you've accidentally replied to the wrong thread, or I have not explained the problem at all well. Your answer does not relate to my problem at all.Sent from Cisco Technical Support iPhone App

ramtech.computing · 12-31-2012

OK, To supply the results of some additional testing...I re tried the pool method outlined about and added the following to the config.I removed the IP 203.xx.xx.96 secondary address from fa0/0I removed te permit ip 192.168.86.0 0.0.0.255 from the ac...

ramtech.computing · 12-31-2012

Hi Paresh,Actually the aclAllowXxxVPN ACL is the interesting traffic for the Crypto Map. Some traffic originating on the 192.168.86.0/24 subnet does not get NAT'd to the internet. It get nNAT'd over Lo1 and out the CryptoMap to a ThirdParty if it i...

ramtech.computing · 12-31-2012

Hi Jeff,The connection is a 100Mb Ethernet handoff. It's in a Data Centre. Please ask any other info as i am sure i haven't explained the situation adequately.

ramtech.computing · 04-24-2012

Hi Kevin,you need to make some changes here. We'll assume your internal interface is fa0/0 and your external is fa0/1 for the sake of this reply. ip access-list extended aclPortFrowardRange permit tcp any any range 60000 64999 permit udp any any r...

Member Since	‎06-20-2008 02:26 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	37
Total Helpful Votes Received	3

User Statistics

User Activity

1841 NAT(?) issue

867w Wireless configuration

PPPoE on 1812 configuration problems

Static NAT and same port traffic over IPSec tunnel

ACL to allow NAT traffic on 857 router without CBAC

Re: 1841 NAT(?) issue

1841 NAT(?) issue

1841 NAT(?) issue

1841 NAT(?) issue

NAT on a Cisco IOS router