About pheavens85

pheavens85 · 06-16-2016

i have created a QoS policy that includes the following catch-all policy: ip access-list extended ACL-COPP-CATCH-ALL permit tcp any any permit udp any any permit icmp any any permit ip any any In this article it specifies that the default class is "N...

pheavens85 · 04-16-2015

Just wondering why we are limited to only using 100-199 for FEX numbering...?Just came up with a port-channel numbering scheme for two rooms and ended up using numbers above 200 to designate rooms (ie 212 - room 2, rack 1, FEX 2). Having to rethink i...

pheavens85 · 08-26-2014

What kind of transmit queues does a WS-x4712-SFP+E have available?I am looking at the spec sheet but cannot determine - http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-4500-series-line-cards/product_data_sheet0900aecd8021...

pheavens85 · 03-27-2014

Hi allI've read in the 'IP Multicast Best Practices for Enterprise Customers' whitepaper that Assert can cause issues which states the following:"Assert issuesThe PIM Assert mechanism prevents duplicate traffic from flowing into a multi-access networ...

pheavens85 · 03-27-2013

Hi thereCurrently have an ASA 5545. What I want to do is allow our support team to perform ALL show commands (up to and including show run) but not enable them to perform ANY configuration changes on the devices (not get into config t). This is to al...

pheavens85 · 11-30-2016

i have the same issue on a ASR 1002 with the same ROMMON version. My IOS image is asr1000rp1-adventerprisek9.03.16.02.S.155-3.S2-ext.bin

pheavens85 · 05-03-2016

Hi there Think you have a minor type here: The default size of the netflow cache is 64k entries. The maximum configurable size of the netflow cache is 1M entries.Configuration for that is as follows:flow monitor-map FMcache entries 10000 I think you ...

pheavens85 · 04-26-2016

Is the authentication MD5 or plain text? Also, it doesn't appear that HSRP version 2 supports authentication at all? At least I don't get an option to use it if I specify version 2 OR use a group above 255 on an ASR 9K.

pheavens85 · 04-13-2015

Hi Ron Regarding this statement: "If using the Management Interface for Peer-Keepalive traffic, the management interface should be connected to a Layer 2 management switch, not back to back" What is the disadvantage of a directly connected peer-keepa...

pheavens85 · 08-26-2014

Thanks for the response.I was under the impression the queues and such come form the hardware... Or maybe that is other platforms (6500's)?The supervisor is a Sup 7-E. i see on the spec sheet that it has 8 queues; is it safe to assume one of them is ...

Member Since	‎09-12-2006 11:41 PM
Date Last Visited	‎11-23-2017 02:45 AM
Posts	15

User Statistics

User Activity

COPP policy question: What kind of 'non-ip' traffic will hit the 'class-default'?

Why the limit on FEX numbers?

Questions about transmit queues and other QoS features of 4500 chassis

PIM Assert: Potential for routing loops?

Local ASA passwords to allow ALL show commands, no config

i have the same issue on a

Hi there

Is the authentication MD5 or

Hi Ron Regarding this

Thanks for the response.I was