About filipequintela

filipequintela · 08-14-2020

Hey Guys,I have configured BGP multipath to get BGP load balancing between two ASs on my company.The scenario is in annex. Basically i have two routers interconnected with 2 links running in different ASs.BGP multipath was configured so that i could ...

filipequintela · 08-03-2020

Guys, i'm recently studying for an implementation of BGP Link Bandwidth so that i can be able to load balancing traffic between two point to point networks that i have on my company.What i have reached so far is that I'm able to see the networks via ...

filipequintela · 01-14-2014

Guys,Is it possible to have media flow around and transcoding at the same time or is it mandatory to have media pass though configured?I'm looking for a way to have all my endpoints talking P2P and have media pass though only if it's necessary trasns...

filipequintela · 10-16-2013

Hey Guys,I believe this one is a good one.I'm trying to integrate CISCO and Polycom using a CUBE.What i got until now is:1. Calls from CISCO to Polycom are perfectly fine.2. Calls from Polycom to CISCO needs the intervention of a field engineer to se...

filipequintela · 07-01-2013

Hello Guys,Would like to know if i will have to get license for this SRST implementation.What i have:1. Cisco CISCO2921/K92. (C2900-UNIVERSALK9_NPE-M) - IOSThe sh license tells me that:#sh license featureFeature name Enforcement Evaluati...

filipequintela · 08-04-2020

Thanks Joseph.In fact what i'm doing is something similar.I'm running an internal OSPF process on the routers that is responsible to redistribute the routes do the BGP and vice versa.Problem is that when i send traffic to one of the routers this rout...

filipequintela · 08-03-2020

Thanks Paul.I would like to do that but unfortunately i dont have BGP running on the switches. just ospf.

filipequintela · 08-03-2020

but is there a way to make they at least think that they are equal?

filipequintela · 10-16-2013

on the same trace there's a call which is working.same caller and called number.On the polycom codec there's some settings where you can specify which bandwidth to use on the call. When i do set this to 64 kbps the call completes perfectly fine. audi...

filipequintela · 10-16-2013

Hey Guys,Here is attached the debug ccsip all:1. First call we were using 128 kbps and didn't worked.2. Second call we have used 64 kbps and it worked.Caller: 93501 - Polycom video endpoint HDX4500Called: 9219357493 - cisco 6941and also the CUBE conf...

Member Since	‎03-05-2006 02:02 AM
Date Last Visited	‎08-16-2020 10:15 AM
Posts	21

User Statistics

User Activity

Traffic being assymetric and CEF

BGP Link Bandwidth - Problems (or not?) to load balancing.

CUBEs, transcoding and media flow around.

CISCO and Polycom integration via CUBE

CISCO SRST license question

Re: BGP Link Bandwidth - Problems (or not?) to load balancing.

Re: BGP Link Bandwidth - Problems (or not?) to load balancing.

Re: BGP Link Bandwidth - Problems (or not?) to load balancing.

CISCO and Polycom integration via CUBE

Re: CISCO and Polycom integration via CUBE