Hello Community!Ther is an old 7510 WLC which will be replaced one day but this day didn't come yet.Looks like last firmware for it AIR-CT7500-K9-8-5-182-0.aes and it's affected by CSCwd80290.And recommended 8.5.182.7 for this model isn't avalible. T...
Hello!I have 1941W for my personal usu and LAB.From the posthttps://community.cisco.com/t5/switching/1941w-expansion-slots/m-p/3089729#M387605I know EHWIC-D-8ESG-P (8 port) EHWIC-D-4ESG (4 port) are supported. (BTW 10/100 Hwic are not) My primary q...
Dear Cisco communityI have a 2 question about new wireless controller 9800Our partner is about to purchase 3504 WLC to replace 2504. But when entering https://www.cisco.com/c/en/us/products/wireless/3504-wireless-controller/index.html Cisco offers to...
Hello!
Please help me with the problem like :
https://supportforums.cisco.com/t5/other-wireless-mobility-subjects/aironet-3800-as-standalone-ap-for-site-surveys/td-p/3012689
My configuration is:
Cisco flex 7510 controller in HQ.Hundreds of 1602 an...
Hello, community!
I want to find out how redundancy for 4500 switches (like 4510R-+E 4507R-+E) really works. Looking to the nonredundant chassis 4506E I do not see any microchips, and so there is no clever device, accept the SUP, that could fail an...
Hello!I've found intresring dochttps://www.cisco.com/c/en/us/support/docs/switches/nexus-3000-series-switches/200381-Nexus-3000-9000-Consolidated-Interface.htmlwhich says:Note that even though the command help gives the option to breakout the ports i...
I have a new result now! It starts to work with SB-PWRINJ-2 and 1Ge port.
It is not possible for me to upgrade to 8.5 because of 1242 , 1262 Aps
So I have one working config for 2802 on 8.3.140:
Non PoE Cisco SB SF300; Ge port; SB-PWRINJ-2; ...
Thanks a lot for reply!I see the symptoms and output is very close to https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvi14641When updates for 8.3.X are planned?
My previous working configuration was: Branch: Cisco SB SF300-48, 10/100Mb port SB-PWR-...
