About victoriabardy

victoriabardy · 04-11-2024

We have a 9800-CL Wireless Controller running 17.12.2. We just got a new CW9164I-ROW AP and its registered by the operational interfaces are down due to a regulatory domain error. Is there a way to change the regulatory domain for the access point?...

victoriabardy · 04-03-2024

Hello all,I am in the process of configuring a new hardware to replace our existing core Catalyst 4500 switches with Cisco 9500 switches. I have two port channels with the following configuration:interface Port-channel2switchportswitchport mode trun...

victoriabardy · 02-11-2024

I have a number of switches that need to be upgraded but it takes a LONNNNG time to copy the firmware from the external server I need to use to the switches. I have the new firmware on one of the 9300 switches. I haven't used the command to copy th...

victoriabardy · 01-15-2024

Hello all,I am traveling to an office tomorrow to perform a firmware upgrade to a cisco 9300 stack. Having already installed the new firmware (the upgrade is in "Install" mode) I am seeing something that has me worried. When I check the .conf file ...

victoriabardy · 10-31-2023

I am performing the prep work for switch firmware upgrades and seeing two files showing in dir flash:/*.conf:STCK1#dir flash:/*.confDirectory of flash:/*.confDirectory of flash:/16416 -rw- 7488 Oct 31 2023 20:43:28 +00:00 packages.conf114691 -rw- 755...

victoriabardy · 04-11-2024

Hello All,Thank you for the feedback here. This location is in London so the country is the United Kingdom and that along with the model of AP is showing compatible with ROW:However I am not seeing any ROW option in the controller. I am guessing th...

victoriabardy · 02-13-2024

Hi Leo,The bin file is present. Can you share with me the commands to copy the file over? Do I still need to enable scp to make this work? Can you please let me know?Thank you.

victoriabardy · 02-13-2024

Hi Joseph,I was tftp'ing from a server in a different office to get the firmware over. I think you are right about enabling a server, I believe its scp but I don't remember the commands and that's what I am looking for here. Thank you.

victoriabardy · 01-15-2024

This is the output I get from show file systems:#show file systemsFile Systems:Size(b) Free(b) Type Flags Prefixes- - opaque rw system:- - opaque rw tmpsys:1651314688 1557999616 disk rw crashinfo: crashinfo-1:1651507200 1563426816 disk rw crashinfo-2...

victoriabardy · 01-15-2024

Hello MHM,This is a three member 9300 stack and the only member giving me this permissions error is the primary switch. The file name looks to be correct.

Member Since	‎04-06-2006 05:56 AM
Date Last Visited	‎04-12-2024 12:48 AM
Posts	421
Total Helpful Votes Received	15

User Statistics

User Activity

Can I change the regulatory domain for our new CW9164I-ROW AP?

How do I recreate a port channel switch virtual link on a C9500-16?

Copy a firmware file from one cisco 9300 switch to another?

Cisco 9300 Error opening flash:packages.conf (Permission denied)??

Cisco 9300 switch upgrade prep, two files in dir flash:/*.conf ?

Re: Can I change the regulatory domain for our new CW9164I-ROW AP?

Re: Copy a firmware file from one cisco 9300 switch to another?

Re: Copy a firmware file from one cisco 9300 switch to another?

Re: Cisco 9300 Error opening flash:packages.conf (Permission denied)??

Re: Cisco 9300 Error opening flash:packages.conf (Permission denied)??