Sam,
Surendra's document match exactly your needs.
You need two VLANs which will be mapped to two different SSIDs, one for guests and one for your internal network.
I would suggest you configuring your two SSIDs as in the example of SSID #3 given by ...
Hola Mikel,Me extraña un poco el tipo de cable que estas usando. Usualmente el cable de consola es plano. A menos que tu hayas fabricado el cable o alguien mas lo haya echo. Has usado este cable de consola satisfactoriamente en algun otro dispositivo...
Hola Mikel,Si hablo español.Muy bien, si gustas te puedo tratar de guiar en este proceso.Antes que nada, para conectar por consola, sabes que debes usar un cable especial? No es el mismo cable RJ45 que se usa para las conexiones Ethernet. Luce asi:Lu...
Hello Mikel,If you don't know which IP address do the AP obtain from the DHCP server, then you need to access the AP through its console port.For that, you will need an RJ45 to DB9 cable (console), and if your laptop does not have a serial port, then...
Hello,As you are saying this is a hospital, I really recommend you to run a proper site survey.Depending on the requirements, if this network will handle patient care wireless devices or doctors/nurses wireless devices, a correct network design is cr...