Michael Sales

Using Jabber version Version 14.0.0.55549 Build 305549 and I've tried the ordering of speakers but i...

Hi Pieterh, Okay so that's asking for the radio count. its calculating the Antenna Gain = (# radios)...

pieterh. I have 2 x 1562E AP's. One is the RootAP and the other is MeshAP mode to create a bridge. E...

I wanted to post this for anyone with 9300 switches for Guest shell to work:this worked for me. Enab...

Hi Leah,You are correct, but it has differences. Unlike IAP's which can scale to 50+, the WAP's are ...

We are using PrimeNCS (soon upgrading to Inf. 2.0) as a Multitenent Management for out Schools. I ad...

We are using PrimeNCS (soon upgrading to Inf. 2.0) as a Multitenent Management for out Schools. I ad...

Hi,Scott is correct. Cisco requires a dedicated controller.

Hi Saurav,Thanks for the Response.Let me give a bit of backround. We use a WISM2 as a "Flexconnect" ...

Hi Everyone, I have a few required QoS settings for a Voice system between two buildings being route...

Christian is Correct. You sure CAN!! run 802.11n on 802.11b/g but as he stated, Cisco recommends onl...

HI Scott,My client user idle timeout is 300 Seconds which is default.What do you suggest?

Good Afternoon All,We use a WISM2 Controller for our "Flexconnect" deployment out to our Districts. ...

Hi Guy's and Gal'sI have a problem like Michael does... just a tad different. My AppleTV's are updat...

I think I may have found my problem.I should have used a permit statement? then let the VACL action ...