hi all we have user sitting in reception and request to have access call forwarding for all the phones in the office. so when user not in office they can just change it to a number. (3000phones) can you please give me some options or exisiting produc...
hi i want to understand what is the STP / virtual port limitation on VS-S2T-10G on 6513-E VSS chassis.
we have 220 vlan and 100 trunk connect to the vss using 10Gb cables. cpu sometime spike to 100%
on some old cisco doc we see RPVST limit is 15...
hi we have failover setup and enabled on 2x5510 (version9) devices via mgmt0/0, everything is working finewe have ip address for inside/ouside/DMZ on active ASAhowever, no standby ip address configed, just like to ask to enable interface monitoring ,...
hi guysquick question is , is there a log/or SNMP/ for extension mobilty user signin to which phyical phone?we are planning ask users to use laptop and extenstion mobility to let user work at any desk in the 4 floor office building.however currentl...
hi allwe use NBAR at our 2821 router with 12.4 to reconize voice traffic. we might start using lync for some voice client and seems its using sRTP for media traffic.does cisco nbar reconize sRTP and RTP exactly the same? so i have nothing to change?o...
this works great, can you explain the work process on the ISE/WLC?eg user enter username/password on laptop.un/pw info + wifi mac pass to WLC -> ISEISE authencticate first on authentication rule1? then rule2? then authoriation rule 1 rule2?would you ...
i think find a fix. export the DN with MAC address , setup 3000 userid with extensions and asso with single MAC.will run the script every week and set user login password.(only share with reception) this way reception will still use cisco user admin ...
thanks for the suggestion, but the speed is very slow after adding 500phones, take 2mins to run. like the idea of using API. but that means we have a webserver need to manage.we have PCP, how can we give reception use that?
did you find the info you needed? about the virtual port limitation
i read this too
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_5.html
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/io...
