About yuchenglai

yuchenglai · 07-12-2012

Giuseppe,What if I have 3 routers, A, B, and C. Router C sends an ARP request for a destination to R...

yuchenglai · 07-12-2012

Hi All,I was wondering if anyone knows whether or not a router (enabled with proxy arp) will respond...

yuchenglai · 07-12-2012

Hi All,I was wondering if anyone knows whether or not a router (enabled with proxy arp) will respond...

yuchenglai · 05-29-2012

Hi all,I was wondering if it is possible to run PIM NBMA and Dense Mode on the hub router in a hub /...

yuchenglai · 05-11-2012

All,I was wondering if someone could explain the difference between using applying PPP multilink gro...

yuchenglai · 04-26-2012

Peter,Thanks for the insight. That cleared things up quite a bit!David

yuchenglai · 04-25-2012

When pinging from the switch, I am sourcing the ICMP from a routed port, and the ICMP packets are di...

yuchenglai · 04-25-2012

Hi All,I found documentation that OSPF will forego the same "subnet" check for adjacencies on point-...

yuchenglai · 04-25-2012

Hi All,I was wondering if anyone would know why a WS-C3750G-24PS would drop ICMP packets when those ...

yuchenglai · 04-20-2012

Trung,Looking at the "Explicit Route" section of the output of "sh mpls traffic-eng tunnels", it app...

yuchenglai · 04-19-2012

Trung,To which routers do these addresses belong?10.1.23.310.1.36.310.1.36.6David

yuchenglai · 04-19-2012

Trung,Can you provide the output of "sh mpls traffic-eng tunnels" on R2?David

yuchenglai · 04-18-2012

Trung,Can you provide exactly what you are routing into the TE tunnel?If 5.5.5.5 is being routed on ...

yuchenglai · 04-18-2012

Gustavo,That is what I thought but just wanted to confirm.Thanks!David

yuchenglai · 04-17-2012

Hi all, Does anyone know if it is possible to apply LLQ and/or shaping on the outbound direction of ...

Date Registered	‎07-28-2005 05:07 PM
Date Last Visited	‎08-18-2017 04:03 AM
Total Messages Posted	211
Total Helpful Votes Received	4

IP Proxy ARP Behavior