About david

david · 05-01-2015

I've logged a TAC case for the issue around TLS and I'll feed back if/when we get a resolution.

david · 04-23-2015

Just thought I'd post an update. After a couple of days away from the office had a chance to look at...

david · 04-19-2015

Hi Moyo,I have tested 2 of the units that we have deployed on the same site which is remote from VCS...

david · 04-17-2015

Thanks Patrick, We originally upgraded to 7.3.2 and hit the issue. We then downgraded to 7.2.1 and 7...

david · 04-17-2015

I'm hitting exactly the same issue here. Did you get a resolution to the problem in the end? I've en...

david · 04-16-2015

Thanks for the feed back on the logs. I have reviewed the VCS configuration for the Jabber Video cli...

david · 04-15-2015

Thanks for the response George. Copy of the logs are attached. The call from the SX10 is from 1067@v...

david · 10-17-2014

Durraze,the path is set within the HTML code that you embed from SocialMiner into your own HTML page...

david · 10-02-2014

Shabeer, never found any documentation on the support for this, but we did upgrade our SM to 10.5(1)...

david · 07-01-2014

Hi, Sorry not a feature we use so not something I have looked into.

david · 05-22-2014

Configure a Chat Feed1.Access the Feeds panel.2.Click Add.3.Select Chat as the feed type, then enter...

david · 04-25-2014

We finally resolved this by removing all the new licenses via the CLI, restarting the HA cluster and...

david · 04-10-2014

Great thanks Wayne for the quick response.Regards David

david · 04-10-2014

I saw a video recently of the launch of the Telepresence SX10 Endpoint and although the unit came wi...

david · 04-07-2014

Check to make sure the Cisco Unified CCX WebServices is running. We found that this was in a shutdow...

Date Registered	‎09-07-2005 11:03 AM
Date Last Visited	‎06-12-2018 05:59 PM
Total Messages Posted	94
Total Helpful Votes Received	25