About david

david · 07-25-2012

We have just completed an upgrade of CUCM from 6.1.2 to 8.5.1. We already have CUPS 8.5 installed pr...

david · 06-11-2012

We are currently running MP 6.1 with CUCM 6.1.2. We are planning to upgrade our CUCM to 8.5 in the n...

david · 05-27-2012

Many thanks for the response. Other options seem to work for the dialing number but i have them goin...

david · 05-10-2012

Setting up a dial plan on port A (internal) to allow a short code to be dialled to push off to an MC...

david · 07-27-2011

Glad to help.RegardsDavid Please rate helpful posts

david · 07-27-2011

Bob,Sorry if this is not clear. The scenario that you have is exactly what we had, we aquired anothe...

david · 07-17-2011

Many thanks SamSent from Cisco Technical Support iPhone App

david · 07-13-2011

We are configuring up the EWS gateway to our exchange 2010. All impersonate checks completed OK. Upl...

david · 07-07-2011

Update for anyone hitting this. After working with TAC we identified that we were hitting the follow...

david · 06-23-2011

Hi Atul,thanks for the post back. Had a look at CSCsv47328 but can't see where to download patch #10...

david · 06-22-2011

All,Following the 'Using Microsoft Exchange 2010 with Unity version 8.0, 7.0 and 5.0 document found ...

david · 06-17-2011

We have just set this up at the begining of the week and have this working. We have x4 ACS 5.2 boxes...

david · 05-17-2011

Many thanks. Just what I was looking for.Sent from Cisco Technical Support iPhone App

david · 05-17-2011

LMS 4.0 guide states that ESXi4.0 is supported. Anyone know if ESXi 4.1 is supported under LMS 4.0.1...

david · 05-17-2011

Recommended Client Hardware and Software Requirements Component Recommended Client System Requiremen...

Date Registered	‎09-07-2005 11:03 AM
Date Last Visited	‎06-12-2018 05:59 PM
Total Messages Posted	94
Total Helpful Votes Received	25

MeetingPlace 6.1 CUPC 8.6.1