We have an existing ACS 5.4, 1 primary, 1 secondary. Im not really sure which procedure to follow. On the upgrade document from Cisco, you need to upgrade the log collector, then the secondary, then the primary. In our setup, the Primary server is th...
We have a port-channel from a 6509 to a vPC to Nexus 5k. Now one of the links has high errors, high input and CRC errors on the interface in the 6509, high output error on the Nexus.
I am trying to upload an IOS image from our server usin ftp or tftp but I get the following error:FTP:copy ftp://user:c1sc0@172.25.X.X/c3560-ipbase-mz.122-25.SEE3.bin flash:c3560-ipbase-mz.122-25.SEE3.bin%Error opening ftp://user:c1sc0@172.25.X.X/c35...
we are having problems with nat alg. I need to know the h323 version, cisco tac needs to know if its version4 or 5. Please help. show gateway does not work in the router
Yes, that's what I first suspect about since these are input and CRC errors. Also noticed in some posts here that the discrepancy of vlans allowed in the trunk sometimes causes these errors too. It's either L1 or L2 right? Do we ever go above this?
im not a cisco employee also but i can see the details of the case from here. https://tools.cisco.com/ServiceRequestTool/scm/mgmt/casecisco.com > support > open/view cases.I dont have any background on cisco voice thats why Im asking herehe is askin...
HiWe're experiencing the same problem. But are you sure of the way that you resolved the issue?We have both NCS and NCS (WAN) 1.1.NCS-VA-1.1.0.58.ova is the installer for NCSNCS-WAN-VA-1.1.0.1114-small.ova is the installer for NCS WAN 1.1We cannot lo...
Its already working, but too slow. Also the webgui home page does not show up properly on IE. Also I cannot launch it remotely, but the server is reachable from my computer
