About martinbuffleo

martinbuffleo · 09-23-2013

I want the dialer in a down state until a user connects then the dialer for that user can come up. W...

martinbuffleo · 09-23-2013

The router is configured as a hub VPN sever for my mobiles users.I don't have the option for dynamic...

martinbuffleo · 09-18-2013

Can I force dialer interface down until some one dials in?Sent from Cisco Technical Support iPhone A...

martinbuffleo · 09-16-2013

Cancel thatTurns out my 3rd party VPN device althought it claims to packet capture its wan interface...

martinbuffleo · 09-16-2013

crypto isakmp policy 2 encr 3des authentication pre-share group 2 lifetime 3600!crypto isakmp policy...

martinbuffleo · 09-12-2013

Yep. Dynamic tunnels don't work in main mode with pre shared keysSent from Cisco Technical Support i...

martinbuffleo · 09-12-2013

If you use certificates and main mode, or psk and aggressive it will work fine. I have a number of p...

martinbuffleo · 09-12-2013

I have a router on a stick configuration.With sub interface .1 and .2I have applied the crypto map t...

martinbuffleo · 09-03-2013

Sorry my Spokes tunnel config is:interface Tunnel0description HO-VPNbandwidth 100ip address 10.x.250...

martinbuffleo · 09-03-2013

My DMVPN worked fine yesterday. However the DMVPN didn't come in. I left it for 20 with no joy. Once...

martinbuffleo · 08-14-2013

I am seeing clean pings from my PC's Thanks for the informative replies

martinbuffleo · 08-14-2013

Its only happening on my call managers and both call managers are in different data centres.and the ...

martinbuffleo · 08-14-2013

I have just noticed this morning that both me Call Manager servers are droping one in 6 pings.Both s...

martinbuffleo · 07-30-2013

Thank you very much for the reply. Sorry for the confusing typo.That helpped me out greatly.One litt...

martinbuffleo · 07-30-2013

I have a branch office VPN configured:Site A 192.168.0.0/24Site B 192.168.2.0/24Site A also host my ...

Re: force dialer interface down