Hi,I have 3802i APs and a 2504 controler runniung 8.5.161.0.My network rebooted the controller came back up fine, the NTP is set and have checked the clock and set to correct time, but none of the APs are joining the controller it was all working fin...
I have a WLC-2504 with 3 AP's connected which are AIR-AP3802I-E, software level on the controller is 8.5.103.Untill recently everything has been working perectly, with in the last couple of weeks I am geting random clients (Microsoft Windows Laptops ...
Hi we are getting the above error, we have issued the no ip cef optimize neighbor resolution command and cleared all the ARP tables yet we are still getting this error for 3 IP's Any ideas how we can fix this we are running ios 15.0(2)SE9
Hi,
My current setup is that I have a 2960S switch which links to a 897VA on a trunk link, the 897VA is setup with 6 vlans for various networks. The 897VA is also setup with ADSL connection to Plusnet via the built in VDSL controller it is also setup...
I have fully deployed my asa5506-x and set the firePOWER module up with NTP server and have also configured a policy rule to stop bittorrent on one of the ionternal networks and all is working good.
The issue is when i go to home on the ASDM and sele...
Ok thanks, i have it working, but i would like to upgrade the software so its done properly. I have seen in the past if there is a major bug then cisco will supply the software for free i just cant remeber the page we go to for that
i changed the date as recomended by that link but now i get this[*05/07/2015 09:33:20.0001] CAPWAP State: DTLS Setup[*05/07/2015 09:33:20.0005] dtls_connectionDB_add_connection: Number of DTLS connections exceeded two[*05/07/2015 09:33:20.6790] dtls_...
