I have a sip trunk with a provider connected via a cube 2900 router. The router is connected to cucm via internal sip trunk. When I make a call From analog Phones Connected to an Fxs port Customers are complaining that they Cannot hear me. the sound...
Requesting the community assistance with an issue I'm having with MGCP registration. When the router is booted up it may get 1 or 2 succesful download. The registration status on the router says unregistered - call manager says unknown.
Then I woul...
I have a route that's being advertised to me by my provider but I don't want to inject it in my BGP table I want to filter it out. The example below will make my point. The routes from .4 - .32 are individual /24 routes being advertised to me. How...
We are in the process of installing a 3rd. party IVR System connected to our call manager using SIP Trunks. The IVR has 5 servers with a SIP connection on each that could answer call at any given time. My plan was to build 5 SIP Trunks and put them...
At our company we are doing SIP Trunking between the provider and CUCM. The trunk terminates on the call manager itself. We don't have any CUBE in our environment. Most of our remote locations have a regular router with no pvdm, fxo, or uck9 and c...
Thanks for replying. I forgot to mention that we're not going over the internet. We have an MPLS connection with the provider.Also I don't see any evidence that it's congestion related. Ip phones works just fine. Only analog devices have the issu...
Peter thanks for replying to my email and sorry for the late reply. I was using an illustration to show that we have a supernet broken out in to multiple subnets in that range. We are actually subnetting it to 62.128.0.0/11 as shown below. I under...
Thanks for your response. As relates to 2. This still relates to the IVR. What I need to do is when I receive a call from a customer via ITSP SIP Trunk, I need to route it to the IVR via the sip trunk between CUCM and the IVR. That would be the ...
