Lawrence Searcy

Lawrence Searcy · 05-24-2012

The 887 AP IOS runs independently of the router's IOS. They are almost like a separate router and AP...

Lawrence Searcy · 05-24-2012

I found CSCsz18634 show interface shows 0 packet in interface input and output rate First identified...

Lawrence Searcy · 05-01-2012

Hi, Cisco recently instituted a way of checking what equipment was actually *on* the contract before...

Lawrence Searcy · 04-18-2012

I noticed I did a typo when I wrote "only messages above severity 4 will ever be sent". I meant to s...

Lawrence Searcy · 04-18-2012

First, the version helps identify if you are hitting a bug. To get the entire call home configuratio...

Lawrence Searcy · 04-05-2012

We have to separate what the switch has to do for packets to reach 10.0.36.28 and what the switch ha...

Lawrence Searcy · 04-03-2012

First, the layer-2 multicast lookup command just determines whether to use layer 3 or layer 2 to gen...

Lawrence Searcy · 11-28-2011

The method you describe in the workaround is called universal client for the 871. See https://suppor...

Lawrence Searcy · 11-27-2011

It gets complicated. The way this works is that IBM designs and controls the chassis and Cisco desig...

Lawrence Searcy · 10-02-2011

I want to update my last post. The Nexus 7000 business unit has indicated that they support IGMP mul...

Lawrence Searcy · 09-29-2011

I should add if you do IGMP multicast mode on, say, a 6500, you need to make sure that IGMP snooping...

Lawrence Searcy · 09-29-2011

You need the command from version 5.2(1)mac address-table multicast 03bf.xxxx.xxxx vlan interface ...

Date Registered	‎08-11-2010 10:05 AM
Date Last Visited	‎02-07-2020 02:19 AM
Total Messages Posted	57
Total Helpful Votes Received	38

887va-w solution to have same ip for management and bvi wlan int