About DAVE GENTON

DAVE GENTON · 10-21-2015

UCS 2.2(3d) new system in customer lab for us to automate with Director and test workflows before cutting loose on production UCS clusters. Customer has a standard in which the mac-addresses and wwxn's must be statically assigned based upon loca...

DAVE GENTON · 09-27-2015

Installed VSS 6800 pair with 3 IA groups for a customer in a pretty small network. This 6800 is core and four wan routers terminate into IA's for branches, Internet etc. Transitioned them off a pair of 4507's with a trunk between the two networks...

DAVE GENTON · 06-23-2015

New customer install has issues with single blade. After running a few days we powered down all devices, upon powering back on 1 server wouldn't boot. B200 M4 2.2(5A) Booting from SAN, no changes done to it all others are identical and powered u...

DAVE GENTON · 11-21-2014

Having issues with new core on 7710's upgraded from 6.2(8a) to 6.2(10) running ACL's on all SVI's, Netflow, and DHCP Snooping with one VDC added along side the admin VDC with 2 F348 line cards and dual-sups. The 6.2.10 upgrade was due to TCAM erro...

DAVE GENTON · 07-31-2014

Does UCSM REQUIRE that the CIMC obtain an IP address from the ext-mgmt pool in order to fully discovery the blade and place in inventory ?? or can/does it use an internal 127. address in absence of ext-mgmt yet being created in order to complete d...

DAVE GENTON · 04-06-2016

For those having the same issues its a defect in the code but a simple work around. I had HSRP configured despite VSS in 6880X core due to doing migration from old core to new core. When HSRP was configured the "no ip redirects" that automatically...

Yes, you are correct, and · 10-21-2015

Yes, you are correct, and sorry you're right but I forgot to update this posting. I found the bug ID but it was closed stating fixed in 2.1(1b) however I am running 2.2(3d) and still hitting it. Did this come up again, or get a new bug ID ?? Wh...

DAVE GENTON · 10-01-2015

Nothing, its too simple as I eluded to being that they have such a small network. They have never had jumbo mtu's enabled and they're not now. We have never been able to turn the old router off so no real traffic is traversing just our pings and su...

DAVE GENTON · 09-30-2015

As I eluded, core has 3 IA stacks, that IS the topology with exception of the 4500 as a router on a stick that's going away when layer 3 performs "normal" in 6800. Legacy and remaining network has been moved, everything is in this core via IA's. We...

DAVE GENTON · 09-30-2015

I agree, yes I checked all that first as well, I've checked EVERYTHING. The VSS Core is the STP Root. With the legacy 4500 gone, the VSS core is pretty much all there is with everything terminating into it. From the switch I see no legacy goin...

Member Since	‎06-14-2002 10:26 AM
Date Last Visited	‎04-12-2024 12:48 AM
Posts	234
Total Helpful Votes Received	27

User Statistics

User Activity

Duplicate Zones in Service Profile created by UCS Director ?? 2.2(3d)

6880-X VSS Very Slow Layer 3 15.1.2SY1, Router on a stick fixes it ! Please help

B200-M4 2.2(5a) Wont boot after being powered off

Nexus 7710 F348's TCAM Allocation Errors

UCS Blade Discovery ?

For those having the same

Yes, you are correct, and

Nothing, its too simple as I

As I eluded, core has 3 IA

I agree, yes I checked all