Hi, our UC560 setup is now running for quite some time. But there is still this one issue that is bu...

Hello,After doing some extensive testing, reading and troubleshooting I found the issue. The deploym...

Hello,I recently bought one 7925G WiFi phone. Our setup is a UC560 connected via series 300 PoE swit...

And again,cisco contacted me again - the problem will be fixed in future firmware release - I also w...

Hello, ... again ... :-)I opened a support case. Support told me they removed CCA support with the r...

Hello again,I did some more research on the issue.I downgraded a switch to the 2nd most recent firmw...

Hello,my setup is: 1 UC5602 SG300-10P2 SG300-24PAll switches were sitting at the 1.1.2.0 firmware an...

Hi,our UC560 has two built BRI ports and another two BRIs through a VIC card.BRI ports 0/1/0 and 0/1...

Hi Alexander,I actually see no point in replacing the files on my box, when I already downloaded the...

Hello Alexander,where do I get a "good" copy of the locale *.tar file? Currently my UC560 is on 8.6....

Hi,the font-size probably is locale related and not load related. I did a factory rest on one of the...

Hi Folks,I recently swapped two older phones for newer 7965s. Configuration was done through CCA. As...

I recently changed my spa525g2 with one 500s to a 7965 with two 7914 sidecars. I asked some colleagu...